Description
The Techcon Round Nozzle Cap delivers a round spray pattern through a 0.014 inch orifice for Techcon precision spray valves. It threads onto the fluid housing of TS5520 and TS5540 series valves and sets the discharge geometry that shapes how low viscosity material lays down on the part.
What the Techcon Round Nozzle Cap Does
Orifice size controls flow rate and pattern width at a given fluid pressure. The 0.014 inch round opening suits fine, even coverage of thin adhesives, primers, conformal coatings, lubricants, and release agents. A clean nozzle keeps atomization steady, which is what holds film thickness and edge definition in tolerance during a run.
- Round spray pattern, 0.014 inch orifice.
- Fits Techcon TS5520 and TS5540 precision spray valves.
- Suited to low viscosity adhesives, primers, coatings, and lubricants.
- Stainless construction stands up to solvent based fluids.
- Replaces a worn or clogged nozzle that has drifted out of pattern.
Setup and Care for the Techcon Round Nozzle Cap
Flush the valve before changing the cap so dried material does not lodge in the new orifice. Hand tighten to the valve seat, then dial in atomizing air and fluid pressure on a test piece before moving to production parts. Purge the fluid path at the end of a run and store the part clean. A plugged or eroded orifice changes pattern and flow, so swap it out once spray quality falls off.
| Property | Detail |
|---|---|
| Type | Round nozzle and cap |
| Orifice | 0.014 in |
| Pattern | Round |
| Fits | TS5520 and TS5540 spray valves |
| Material | Stainless steel |
Ordering Spray Valve Parts
Pair this nozzle with compatible spray valves and other dispensers, mixers, and nozzles for your line. For manufacturer background on the spray valve platform, visit Techcon.
Need Help?
Need help selecting an orifice size for your fluid? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.