Sabatack 950 Boost MS Polymer Adhesive, 600 mL Sausage

Description

Sabatack 950 Boost is a very fast MS polymer construction adhesive supplied in a 600 mL sausage with the booster packaged inside the same pack. It gives marine, vehicle, and general manufacturing crews an elastic bond line with low odor, non-sag placement, UV stability, and wet-on-wet paintability when the coating system allows it.

Sabatack 950 Boost Benefits

• Very fast boosted cure helps bonded parts move through production without a long hold period.
• Elastic MS polymer chemistry supports joints that see vibration, movement, and weather exposure.
• Non-sag body helps crews place beads on vertical seams, overhead joints, and broad bonding flanges.
• Solvent-free formula is free of silicones and isocyanates for cleaner shop handling.
• Low shrinkage and low blister sensitivity help maintain a tidy bead after cure.

The 600 mL sausage format fits common foil-pack dispensing guns and reduces container waste compared with rigid cartridges on larger jobs. Use it where an elastic adhesive and sealant has to carry movement without turning the joint brittle.

Where Sabatack 950 Boost Fits

• Marine deck, hull, hatch, and interior bonding work.
• Transportation panels, trim, brackets, and specialty vehicle assemblies.
• General manufacturing joints that need elastic adhesive performance.
• Exterior seams where UV stability and paint compatibility matter.
• Shop repairs where primer-free bonding may be possible after testing.

Surface Preparation and Use

Bond surfaces should be clean, dry, and free of oil, dust, release agents, and loose coating. Abrade smooth metals or coated parts when the job spec calls for it, then wipe with an approved cleaner and allow the surface to flash before gunning the bead.

Cut the sausage cleanly, load it into the correct 600 mL dispenser, and tool the bead before skin formation. Confirm paint, primer, and substrate compatibility on scrap or a hidden area before production use.

Technical Details and Documentation

SABA publishes this grade as a one-component boosted MS polymer adhesive that is solvent-free, moisture-curing, permanently elastic, and free of hazard symbols, silicones, and isocyanates. Review current technical details from SABA Adhesives before approving a shop process.

Ordering Help

For related elastic bonding and sealing materials, browse Chemical Concepts sealants and adhesives. For help matching sausage guns, primers, and surface prep steps, call (800) 220-1966 or email [email protected].