Description
The Techcon M3 x 0.5 x 6 mm Phillips pan head screw is a small replacement fastener for dispensing equipment service. Use this dispenser parts item when a metric machine screw is missing, stripped, or being replaced during routine bench repair. The listing identifies the screw as zinc plated, with a Phillips pan head profile and M3 thread.
dispenser parts for hardware replacement
Small screws often decide whether a repair can close cleanly. Keeping the correct metric hardware with valves, fittings, brackets, and cartridge tools helps maintenance teams finish service without substituting a near match. A pan head screw provides a broad bearing surface under the head, while the Phillips drive keeps removal and installation simple with common shop tools.
Before replacing the screw, clean the threaded hole and check that the old screw did not leave damaged threads behind. Start the replacement by hand, then tighten only to the level required for the assembly. Over-tightening small metric screws can strip a bracket or distort light hardware. Keeping the right screw on hand shortens the repair and protects the surrounding component.
dispenser parts specifications
| Attribute | Value |
|---|---|
| SKU | TECTSD1097-31 |
| Part type | Phillips pan head machine screw |
| Thread | M3 x 0.5 |
| Length | 6 mm |
| Finish | Zinc plate |
| Brand | Techcon |
Bagging service screws by part number, thread, and length keeps rebuild kits cleaner. It also prevents the common shop mistake of mixing similar fasteners that fit at first but do not seat correctly under repeated vibration or cleaning cycles.
For repeat service, record the screw location and keep the removed fastener with the repair ticket until the tool has been tested. That gives the next technician a clean reference if the assembly needs to be opened again.
Confirm thread pitch, screw length, and head clearance before installing. For related dispenser parts, fittings, service hardware, and nozzles, browse dispensers, mixers, and nozzles. Current precision dispensing line information is available from Techcon.
Need Help?
Need help matching metric service hardware to a dispenser repair? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.