Description
chem-set floor tape in red is a 3 inch x 60 yard solid vinyl marking tape for shop floors, facility zones, lane edges, and temporary distancing layouts. The 5.2 mil SPVC construction gives teams a thin, conformable tape that lays cleanly on smooth prepared surfaces and helps mark traffic paths, staging areas, and work cells without paint.
chem-set floor tape Applications
- Red floor lane marking in production, warehouse, and service areas.
- Visual guides for distancing, work zones, and temporary routing.
- Color coding for fixtures, carts, equipment locations, and material lanes.
- Short-run striping where painted lines would be too slow to change.
- Maintenance kits that need quick marking supplies for facility updates.
Clean, dry floors give this tape the best chance to hold a sharp edge. Remove loose dust, oil, wax, and floor cleaner residue before application. Press the tape down firmly along the full width, especially at the ends and corners, so cart wheels and foot traffic do not lift an edge during daily work.
chem-set floor tape Handling Notes
The red color is useful where a line needs to stand out quickly, such as caution areas, rejected material zones, and temporary spacing marks. Use straight guide lines or a chalk reference when long runs need to look consistent. For curved layouts, make shorter sections instead of stretching the tape around a radius.
This is a marking and identification product, so surface condition matters more than clamp force or cure schedule. For adhesive bonding jobs, keep Chem-Set cyanoacrylate, Chem-Set anchor, and Chem-Set primer products separated from floor marking supplies so installers grab the right Chem-Set item for the task.
Because vinyl floor tape is often used in areas that change, plan the layout before the roll is opened. Mark intersections, doorway edges, and forklift travel paths first, then work outward so the finished line reads cleanly from the direction people approach. On concrete, sealed floors, and painted floors, test a small section when the surface history is unknown.
Replace sections when an edge becomes damaged rather than layering new tape over old adhesive. Removing loose material keeps the next line flatter and makes the area easier to clean. Store partial rolls in a clean bag or box so lint and grit do not transfer to the adhesive side before the next project.
chem-set floor tape Specifications
| Property | Value |
|---|---|
| SKU | CCT-CVT-560-RD-3 |
| Product type | Solid vinyl floor marking tape |
| Color | Red |
| Width | 3 in |
| Length | 60 yd |
| Thickness | 5.2 mil class |
| Unit | Each |
For related floor, masking, and specialty tapes, browse tapes. For background on pressure-sensitive tape construction and performance, see the Pressure Sensitive Tape Council. Keep rolls boxed until use, store them away from heavy dust and heat, and mark opened rolls by color and width so maintenance teams can reorder the right size.
Need Help?
Need help matching tape width, color, or surface prep to a facility marking plan? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.