Social Distancing 6 mil Striped Vinyl Floor Tape SST-636 Black/White-2″

Description

2 Inch Floor Tape creates a broad black and white stripe for aisle borders, traffic routes, equipment zones, and housekeeping areas. The Chem-Set SST-636 construction combines soft PVC vinyl with a synthetic rubber adhesive, giving installers a flexible marking material that follows smooth floors and mild contours. Each roll contains 36 yards, or 108 feet, for laying out longer runs with fewer roll changes.

Facility Layout and Aisle Marking

The 2 inch width is a practical middle size for floor layouts that need more visibility than a narrow detail stripe without occupying the space of wider 3 or 4 inch options. Black and white striping can separate work zones, outline fixed equipment, guide pedestrian flow, or identify housekeeping boundaries. Consistent spacing and straight runs make the finished layout easier to scan from normal standing distance.

Start with a clean, dry floor. Remove dust, oils, wax, and detergent film, then allow the surface to reach room temperature before application. Snap a reference line or place temporary alignment marks for long runs. Apply the tape with steady tension, press from the center toward both edges, and roll the installed strip firmly. Avoid stretching the vinyl around corners because stored tension can pull the edge back after installation.

Conformable 6 Mil Vinyl

SST-636 uses a 6 mil soft PVC backing that can follow gentle surface variation while maintaining the striped pattern. The synthetic rubber adhesive develops contact quickly on compatible, prepared surfaces. A 3 inch neutral paper core keeps the roll supported during installation. Published product information also notes that the construction does not corrode copper, brass, steel, or aluminum, making it useful near metal equipment feet and fixtures.

2 Inch Floor Tape Specifications

Select this variant for standard aisle edges and equipment outlines where a 2 inch stripe suits the viewing distance. For additional floor-marking widths and patterns, browse Chemical Concepts single-sided tapes. The Chemical Concepts video library for tape application and surface preparation offers practical assembly guidance. A small adhesion test can confirm compatibility with painted, sealed, or frequently cleaned floors before a full layout is installed.

Need Help?

Need help estimating roll count or choosing a width for an aisle layout? Call (800) 220-1966 or email [email protected].