Specialinsert 620 Automatic Installation Tool for 307 Inserts (10-24)

Description

The Specialinsert 620 tool is an automatic installation spindle for the Specialinsert 307 series of Ensat self-tapping threaded inserts, sized for 10-24 thread. It chucks into a standard drill or drill press and drives the insert square to the workpiece, releasing automatically at the preset depth. The result is a clean, repeatable thread anchor in plastic, composite, or soft metal without hand-tapping each hole.

Where the Specialinsert 620 tool fits

This tool is for shops installing 307 series Ensat inserts in production volumes where consistent depth and squareness matter. Typical users are injection molding operations adding metal threads to plastic housings, composites and carbon fiber fabrication, signage and POP display builders, and any assembly that needs a reliable threaded boss in a non-metal substrate. The 10-24 sized 620 matches the 307 insert at the same thread size, so the tool engages the insert’s internal thread to drive it.

How the Specialinsert 620 tool performs on the line

The 620 uses a threaded spindle that engages the insert’s bore. As the drill spins, the insert is driven into a pre-drilled receiver hole until the spindle hits the preset stop, at which point it backs out without stripping the freshly cut thread. Depth is adjustable by sliding the shell up or down the shank and tightening the locking screw, so the same tool can be set for flush, sub-flush, or proud installations.

Order the 620 in the thread size that matches your 307 insert spec. If you run multiple insert sizes, you will need one 620 per size. Manufacturer reference is at Specialinsert. The matching 307 inserts and other threaded anchors are in our keep-nut threaded inserts catalog.

Need Help?

Need help sizing pilot hole or selecting the right Specialinsert 620 tool size for your 307 insert? Call (800) 220-1966 or email [email protected].