SprayCore SC 1060 Radius Compound, 5 Gallon Pail

Description

SC 1060 compound is a SprayCore radius material supplied in a 5 gallon pail for fiberglass laminate work behind the gel coat. ITW Performance Polymers describes SC 1060 as a ceramic compound resin used in tight radii to help reduce trapped air between gel coat and fiberglass laminate, reduce fiberglass springback, and limit heat distortion in those detailed areas.

SC 1060 compound Benefits

• Designed for tight radius areas where hand layup can trap air behind gel coat.
• Ceramic compound resin supports controlled buildup in marine and composite parts.
• Helps reduce springback in fiberglass reinforcement around detailed shapes.
• Flows and levels evenly when applied within the current process guidance.
• Five gallon pail format fits production shops that need repeatable radius material supply.

This material belongs in composite shops that build boats, tubs, transportation parts, and molded fiberglass assemblies where corners, channels, and tight transitions can become weak or cosmetic trouble spots. Applying the correct radius compound before laminate buildup helps crews create a smoother backing profile for reinforcement and can reduce rework caused by voids or print-through around difficult geometry.

SC 1060 compound Use Cases

• Filling tight radii behind gel coat before fiberglass laminate placement.
• Supporting marine composite layup where air void control matters.
• Improving corner buildup in tubs, panels, and molded composite shapes.
• Reducing fiberglass springback around curves and detail transitions.
• Production work where a 5 gallon pail is easier to stage than small packs.

Application and Ordering Notes

Use this pail with the catalyst, spray equipment, and surface preparation specified by the current SprayCore documentation. ITW notes that MEKP catalyst is not included, so purchasing and production teams should plan catalyst inventory separately. For related coating and composite materials, browse Chemical Concepts coatings. For manufacturer background, visit ITW Performance Polymers.

Before approving a process, confirm temperature, catalyst level, cure timing, and laminate schedule with current technical data. For help matching SprayCore pails to a composite workflow, call (800) 220-1966 or email [email protected].