Description
Stone Seam Clear Flowing adhesive is the flowable resin in the Stone Seam Pro line, a two-part methacrylate (MMA) clear acrylic seaming adhesive for lamination edges, rodding, and any job where you want a more flowing, self-leveling viscosity on quartz, granite, marble, porcelain, glass, and sintered stone. It is UV stable, it will not yellow over time, and it is made in the USA.
The resin runs at 2,000 to 3,000 cps, where the knife grade resins are pastes at 200,000 to 300,000 cps. You tint it with measured dosing pump pigments using a formula from the Stone Seam formula tool or phone app. Pigment goes into the resin first so you can check the color in the cup, and the hardener goes in last.
Stone Seam is the bulk, hand-mix version of the methacrylate chemistry used in cartridge color-match seaming adhesives. For a paste that holds its place on vertical seams and miters, see Stone Seam Pro Clear Knife Grade or Stone Seam Pro Chameleon Knife Grade.
Key Product Details
| Property | Value |
|---|---|
| Product | Chem-Set Stone Seam Pro SS1000 Clear Flowing |
| Chemistry | Two-part methacrylate, clear acrylic |
| Consistency | Flowable |
| Resin color | Crystal clear |
| Hardener color | Milky clear |
| Mix ratio, resin to hardener | 100 to 5 |
| Hardener dosing | Pumps per the Stone Seam formula for your slab and footage of seam |
| Viscosity, uncured | Resin 2,000 to 3,000 cps, hardener 15,000 to 20,000 cps |
| Density, uncured | Resin 8.2 lb/gal, hardener 8.0 lb/gal |
| Mixed density | 8.1 lb/gal (0.96 g/cc) |
| Working time | 4 to 6 minutes at 75°F (24°C) |
| Fixture time | 12 to 15 minutes at 75°F (24°C) |
| Can be moved in | 20 minutes |
| Operating temperature | 65°F to 85°F (18°C to 30°C) |
| Gap filling | 0.125 inch |
| Tensile strength (ASTM D638) | Quartz 2,500+ psi, porcelain 2,500+ psi, natural stone 1,000+ psi, all substrate failure |
| Chemical resistance | Excellent: hydrocarbons, acids and bases, vinegar, wine and condiments, most household foods. Susceptible: polar solvents, very strong acids and bases |
| UV stability | UV stable, will not yellow over time |
| Flash point | 51°F (11°C), see SDS |
| Shelf life | 12 months from date of manufacture, stored at room temperature (77°F). Storage above 100°F (38°C) can shorten shelf life to less than one month |
| Country of manufacture | USA |
Performance in Production
- The low viscosity resin flows and levels out, where a knife grade paste stays exactly where you put it. Reach for Clear Flowing when the job calls for a flowing, self-leveling resin.
- Lamination edges are a common use. The flowable resin spreads across the joint during an edge build-up.
- Rodding is the other common use, for shops that want a flowable resin on the job.
- Gap filling is rated at 0.125 inch, a thinner gap than the 0.5 inch rated for the knife grades. For wider joints and vertical seams, use a knife grade.
- Pigment goes in first and hardener goes in last. You can check the color in the cup and correct it before the cure clock starts.
- The hardener ratio is more forgiving than a polyester or vinyl ester adhesive, where too much hardener can cook the resin and show up as yellowing. Stone Seam is built to set fast without an over-catalyzed, brittle joint.
- The foil pouch holds more than a quart can and gives up nearly all of its resin when you squeeze it out. Cans and pails always leave some behind, and they often get left open, which lets silica and dust fall in and can throw off the color.
- Mix to the job, not to the cup. Large masses of mixed material build heat, and the TDS says to spread the material no thicker than 0.5 inch. Cure slows below 65°F and speeds up above 85°F, so bring pouches to room temperature 24 hours before use.
Common Applications
- Lamination edges and edge build-ups
- Rodding
- Jobs that call for a flowing, self-leveling viscosity
- Filling cracks and seams, and topping off
- Color-matched work built from a clear base with Stone Seam pigments
- Work on natural stone, quartz, and solid surface
- Bonding porcelain, sintered stone, granite, marble, cultured marble, glass, and ceramic
- Joints that see sunlight, including outdoor installations
Available Sizes
| Package | SKU | What is included |
|---|---|---|
| Power Pouch, 1L | CCA-SS1000FLCR-QTFP | 1L resin pouch, 2 oz hardener, mixing cups and sticks |
| Quart | CCA-SS1000FLCR-QT | 1 quart of resin with hardener |
| Master Pouch, 3L | CCA-SS1000FLCR-3L | 3L resin pouch, 4 oz hardener, mixing cups and sticks |
| Gallon | CCA-SS1000FLCR-GAL | 1 gallon of resin with hardener |
| Power Pack, (10) 1L Pouch Kits | CCA-SS1000FLCR-PP | Ten 1L resin pouches, ten 2 oz hardeners, 60 mixing cups and sticks |
| Master Pack, (5) 3L Pouch Kits | CCA-SS1000FLCR-MSTRPK | Five 3L resin pouches, five 4 oz hardeners, mixing cups and sticks |
Every size includes the hardener, so you do not need to order it separately. Replacement hardener is sold in 2 oz and 4 oz sizes. Pigments are sold separately. The Stone Seam trial kit adds three pigments (Arctic, Natural, and Midnight) to a 1L pouch.
Related Products
- Stone Seam Pro Clear Knife Grade, the crystal clear paste for seams that need transparency
- Stone Seam Pro Chameleon Knife Grade, the translucent white paste that matches many white slabs without pigment
- Stone Seam 32-color pigment kit, all 32 pigments in 2 oz pump bottles with a carry case
- Stone Seam 10-color pigment kit, ten 2 oz pump bottles
- Stone Seam Pro trial kits
- All Stone Seam products
How Hand-Mixed Flowable Seaming Works
Hand-mixed flowable seaming means you build the resin color yourself in a cup, check it against the slab, and only then add the hardener. Here is the Stone Seam sequence.
- Look up the slab. Search the formula tool or the phone app by manufacturer, color name, or color number, and enter the feet of seam you are running. It returns the resin, the pigment pumps, and the hardener pumps for the batch.
- Clean and dry the contact surfaces.
- Measure the resin into a mixing cup. Clear Flowing is the base when the job calls for a flowing viscosity, such as lamination edges or rodding.
- Add the pigments by pump and mix until the color is uniform.
- Check the color against the slab and adjust before any hardener goes in. Test the match on a scrap or offcut first, since lighting and slab pattern change how a joint reads.
- Add the hardener by pump per the formula and mix thoroughly. The working time starts here.
- Apply the mixed resin to the joint, laminated edge, or area you are working, mate the parts, and clamp inside the working time. Avoid over clamping, which can leave the joint starved of adhesive.
- Leave the parts undisturbed until fixture time is complete, then clean up and finish.
The process runs on natural stone, quartz, solid surface, granite, marble, cultured marble, porcelain, sintered stone, glass, and ceramic.
Frequently Asked Questions
What is Stone Seam Pro Clear Flowing adhesive used for?
It is used on lamination edges and for rodding, and on any job where you want a more flowing, self-leveling resin on natural stone, quartz, solid surface, porcelain, sintered stone, and glass. It is a two-part methacrylate, clear acrylic flowable adhesive that you run clear or tint with Stone Seam pigments. Flowable seaming adhesive, clear flowing adhesive, and crystal clear flowing adhesive all describe the same type of product, and SS1000 is the TDS number for this resin.
What is the difference between Stone Seam Clear Flowing and Clear knife grade?
Clear Flowing is a thin, flowable resin and Clear knife grade is a thick paste that holds its place on vertical seams and miters. The TDS lists the flowing resin at 2,000 to 3,000 cps with 0.125 inch gap filling, and the knife grade resin at 200,000 to 300,000 cps with 0.5 inch gap filling. See Clear Knife Grade.
Is Stone Seam Pro Clear Flowing UV stable, and will it yellow outdoors?
Yes, it is UV stable, and the TDS states it will not yellow over time. A common cause of yellowing in polyester and vinyl ester adhesives is too much hardener, which is why Stone Seam doses the hardener by pump from a formula.
How do I color match Stone Seam Clear Flowing to a countertop?
Look up your slab in the Stone Seam formula tool or phone app and follow the formula for your feet of seam. The formula lists the resin, the pumps of each pigment, and the pumps of hardener. Because the resin is crystal clear, the pigments build the whole color. Mix the pigment into the resin, check the color against the slab, and add the hardener last. Test the match on a scrap or offcut before you run the job.
Can I use Stone Seam Clear Flowing on lamination edges and for rodding?
Yes. Lamination edges and rodding are the two most common uses of the flowable resin. Mix by the cup, keep the layer within the TDS limit of 0.5 inch, and test on an offcut first.
Does shop temperature change how Stone Seam Clear Flowing behaves?
Yes. The TDS states that viscosity is affected by temperature, cure slows below 65°F, and cure speeds up above 85°F. Bring pouches to room temperature 24 hours before use and keep them out of excessive heat, since an acrylic MMA is temperature sensitive.
Why does Stone Seam come in pouches instead of quart cans and pails?
A strong foil pouch gives you nearly all of the resin and keeps debris out of it. Cans and pails often get left open in a busy shop, and silica and dust that fall in can affect the color. You also cannot get every bit of resin out of a can or pail, where you can squeeze a pouch almost empty. The 1L pouch holds more than a quart can.
What sizes does Stone Seam Pro Clear Flowing come in, and where is it made?
It comes in six sizes: a 1L power pouch, a quart, a 3L master pouch, a gallon, a power pack of ten 1L pouches, and a master pack of five 3L pouches. Every size includes the hardener, and the Available Sizes table above lists the SKU and contents for each. It is made in the USA.
Stone Seam Video
Stone Seam color match system overview
Questions on fit for your lamination or rodding job? Call (800) 220-1966 or email [email protected].


















Reviews
There are no reviews yet.