Description
The DP2X 400-01-50-01 pneumatic gun is the Sulzer Medmix DP2X 400 – 400ml Pneumatic Cartridge Gun set up for 1:1 and 2:1 400ml MIXPAC C-System and F-System two-part cartridges. A 1:1 cartridge delivers equal volumes of each component and a 2:1 cartridge delivers two parts of one component to one part of the other. One gun covers both, so you do not need a separate tool for each. It runs on compressed air through a 1/4 in NPT inlet at up to 100 psi, with an integrated regulator to adjust output force. This part number replaces the older DP 400-85-01 and DP 400-100-01. For full specs, the ratio change steps, and every ratio option, see the Sulzer Medmix DP2X 400 – 400ml Pneumatic Cartridge Gun page.
Part Details
| Property | Value |
|---|---|
| Medmix Part Number | DP2X 400-01-50-01 |
| Article ID | 165864 |
| Chemical Concepts SKU | CON-DP2X400-01-50-01 |
| Mix Ratio | 1:1 and 2:1 |
| Cartridge Size | 400ml C-System and F-System |
| Air Supply | 1/4 in NPT inlet, 100 psi (6.8 bar) maximum |
| Conversion Kit to Change Ratio | CKX 400-04-01 for 4:1 or CKX 400-10-01 for 10:1 |
Mixers for 1:1 and 2:1 Cartridges
The mixer follows the cartridge, not the gun. C-System and F-System 400ml cartridges use different mixer outlets, so match the mixer to the cartridge body.
- Medmix MIXPAC MCQ 08-24T static mixer for 1:1 and 2:1 C-System cartridges
- Medmix MIXPAC MFQ 08-24T static mixer for 1:1 and 2:1 F-System cartridges
Other 400ml Guns for 1:1 and 2:1 Cartridges
- Sulzer Medmix DM2X 400 – 400ml Manual Cartridge Gun when no air line is available
- Newborn VR400-XSP dual component applicator gun as a manual variable ratio option
Frequently Asked Questions
Does the DP2X 400-01-50-01 run both 1:1 and 2:1 cartridges?
Yes. This part number is set up for both ratios, so one gun covers equal-volume and 2:1 400ml cartridges.
Does the DP2X 400-01-50-01 replace the DP 400-85-01 or DP 400-100-01?
Yes. The DP2X 400-01-50-01 replaced the older DP 400-85-01 and DP 400-100-01, which were discontinued years ago. Call us with your old part number and we will confirm the match.
Which cartridges fit the DP2X 400-01-50-01?
The DP2X 400-01-50-01 runs 400ml MIXPAC C-System and F-System two-part cartridges in 1:1 and 2:1. It does not take 200ml cartridges. If you run 470ml or 490ml cartridges, call us at (800) 220-1966 before you order so we can confirm fit.
What mixer do I need for a 1:1 and 2:1 cartridge?
Use the Medmix MIXPAC MCQ 08-24T static mixer for C-System cartridges or the Medmix MIXPAC MFQ 08-24T static mixer for F-System cartridges. Check the cartridge body before you order, since the two systems do not share a mixer outlet.
Can I change this gun to 4:1 or 10:1 later?
Yes. The DP2X 400 uses interchangeable cartridge trays and plunger disks, so a conversion kit changes the ratio. This gun needs CKX 400-04-01 for 4:1 or CKX 400-10-01 for 10:1. See the CKX 400 conversion kits.
Questions on fit for your cartridge, ratio, or conversion kit? Call (800) 220-1966 or email [email protected].
MIXPAC is a trademark of medmix Switzerland AG.







Reviews
There are no reviews yet.