Medmix

Sulzer Medmix DP2X 400-10-50-01 Pneumatic Cartridge Gun – 10:1 Ratio

SKU: CON-DP2X400-10-50-01

$482.39
You save /EA

Order Now! - Only 4 Available

Sulzer Medmix DP2X 400-10-50-01 pneumatic gun for 400ml C-System and F-System 10:1 cartridges. Replaces the DP 400-85-10 and DP 400-100-10.

Quantity:
  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now

Description

The DP2X 400-10-50-01 pneumatic gun is the Sulzer Medmix DP2X 400 – 400ml Pneumatic Cartridge Gun set up for 10:1 400ml MIXPAC C-System and F-System two-part cartridges. A 10:1 cartridge meters ten parts of one component to one part of the other. It runs on compressed air through a 1/4 in NPT inlet at up to 100 psi, with an integrated regulator to adjust output force. This part number replaces the older DP 400-85-10 and DP 400-100-10. For full specs, the ratio change steps, and every ratio option, see the Sulzer Medmix DP2X 400 – 400ml Pneumatic Cartridge Gun page.

Part Details

Property Value
Medmix Part Number DP2X 400-10-50-01
Article ID 165866
Chemical Concepts SKU CON-DP2X400-10-50-01
Mix Ratio 10:1
Cartridge Size 400ml C-System and F-System
Air Supply 1/4 in NPT inlet, 100 psi (6.8 bar) maximum
Conversion Kit to Change Ratio CKX 400-01-01 for 1:1 and 2:1 or CKX 400-04-01 for 4:1

Mixers for 10:1 Cartridges

The mixer follows the cartridge, not the gun. C-System and F-System 400ml cartridges use different mixer outlets, so match the mixer to the cartridge body.

Other 400ml Guns for 10:1 Cartridges

Frequently Asked Questions

Does the DP2X 400-10-50-01 replace the DP 400-85-10 or DP 400-100-10?

Yes. The DP2X 400-10-50-01 replaced the older DP 400-85-10 and DP 400-100-10, which were discontinued years ago. Call us with your old part number and we will confirm the match.

Which cartridges fit the DP2X 400-10-50-01?

The DP2X 400-10-50-01 runs 400ml MIXPAC C-System and F-System two-part cartridges in 10:1. It does not take 200ml cartridges. If you run 470ml or 490ml cartridges, call us at (800) 220-1966 before you order so we can confirm fit.

What mixer do I need for a 10:1 cartridge?

Use the Xemex X2-C8-8S low-waste static mixer for C-System cartridges or the Medmix MIXPAC MFHX 08-24T static mixer for F-System cartridges. Check the cartridge body before you order, since the two systems do not share a mixer outlet.

Can I change this gun to 1:1, 2:1, or 4:1 later?

Yes. The DP2X 400 uses interchangeable cartridge trays and plunger disks, so a conversion kit changes the ratio. This gun needs CKX 400-01-01 for 1:1 and 2:1 or CKX 400-04-01 for 4:1. See the CKX 400 conversion kits.

Is there a manual option for 400ml 10:1 cartridges?

Yes. See the Sulzer Medmix DM2X 400 – 400ml Manual Cartridge Gun for dispensing without an air line.

Questions on fit for your cartridge, ratio, or conversion kit? Call (800) 220-1966 or email [email protected].

MIXPAC is a trademark of medmix Switzerland AG.

Additional information

Weight 3 lbs
Dimensions 6 × 6 × 6 in
Manufacturer

Component

Ratio

Gun Size

Type

Must Ship Freight

Country Of Manufacture

Origin

Reviews

There are no reviews yet.

Be the first to review “Sulzer Medmix DP2X 400-10-50-01 Pneumatic Cartridge Gun – 10:1 Ratio”

Your email address will not be published. Required fields are marked *