Surebonder 707 High Performance Hot Melt Glue Sticks

Description

Some bonding jobs put a hot melt stick up against surfaces it was never designed to grip, and that is where the Surebonder 707 hot melt glue sticks earn their high performance name. The formula is built specifically for difficult surfaces like metal, plastic, glass, and ceramic, alongside the porous materials a standard EVA stick already handles, so a single glue gun stick can move between production stations without a swap.

Hot melt glue sticks built for difficult surfaces

The 707 runs at a suggested application temperature of 375 degrees Fahrenheit with a viscosity of 3,125 centipoise at that temperature and a softening point of 178 degrees Fahrenheit. Open time is roughly 30 seconds, long enough to position a part before the bond sets but short enough to keep a manual assembly line moving. It is an EVA-based hot melt glue stick, clear in color, and formulated for standard-temperature glue guns rather than low-temp craft units.

Because bonding to metal and glass is a common failure point for cheaper hot melt sticks, shops running mixed-material assembly, point-of-purchase display work, or product finishing lines use the 707 specifically to cut down on cold-bond rejects. It is sold by the case in glue stick sizes to match different gun types, with the 1/2 by 10 inch stick available in a 5 lb box (about 90 sticks) or a 25 lb box (about 450 sticks), and a 5/8 by 10 inch stick in a 25 lb box (about 265 sticks).

Surebonder 707 Case Sizing for Any Shop

Chemical Concepts stocks all three case configurations of the hot melt glue sticks so a small shop can order a 5 lb box for occasional use while a production line can order the 25 lb case without waiting on a special order. Compatible glue gun sizing and feed rate questions are common on this product, and the sales team can match a stick diameter to a specific gun model before an order ships.

Full specifications and additional stick sizes are available from Surebonder. Browse the rest of the hot melt adhesives Chemical Concepts carries for production and assembly work. For gun compatibility or case quantity pricing on the 707, call (800) 220-1966 or email [email protected].