Description
TacBond C6010 Bulk Water-Based Adhesive is a non-flammable, water-based contact adhesive designed for foam, fabric, and porous material bonding applications. This quick-drying adhesive provides a soft bond line, strong initial grab, and efficient coverage, making it suitable for a wide range of laminating and assembly processes across industrial and fabrication environments.
Key Features
- Water-based contact adhesive for foam, fabric, and porous material bonding
- Non-flammable formulation supports safer application environments
- Quick dry time with strong initial grab for efficient processing
- Soft bond line suitable for flexible material applications
- High-yield formulation supports efficient adhesive usage
- One-component system simplifies handling and application
- Compatible with spray, roll, and brush application methods
- Low VOC formulation for controlled emissions environments
Technical Specifications
| Specification | Value |
|---|---|
| Product Type | Water-based contact adhesive |
| Flammability | Non-flammable |
| Dry Time | Initial grab; ~30 minutes for full dry |
| Open Time | 2+ hours |
| Color | Natural, Blue |
| Viscosity | 400–600 cPs |
| pH | 7–7.5 |
| Flash Point | <130°F |
| VOC | <5 g/L |
| Solids Content | 42% ± 2% |
| Coverage | 100% mist spray; minimum 3 dry grams/sq. ft. |
| Pattern | Mist |
| Cleanup | Water or detergent solution |
| Shelf Life | 6 months (unopened) |
Compatible Substrates and Materials
- Foam
- Fabric and textiles
- Polyester fiber
- Cotton fiber
- Wood
- Plastic
- Cardboard
- Jute
- Rubber
- Leather
- Vinyl
- Non-woven materials
- Porous substrates
Application Guidance
Stir adhesive before use and apply using spray, roll, or brush methods depending on the application. Apply to both bonding surfaces and allow the adhesive to dry before mating. Ensure full surface coverage at a minimum of 3 dry grams per square foot, with additional coats for porous substrates if required. Join surfaces with firm, even pressure and complete bonding within the stated open time. Clean equipment with water or a mild detergent solution after use.
Typical Use Cases
- Foam-to-foam bonding and fabrication
- Fabric and textile laminating
- Upholstery and cushioning assembly
- Packaging and protective material bonding
- General-purpose bonding of porous materials
Target Industries and Buyers
- Foam fabricators and converters
- Upholstery and furniture manufacturers
- Mattress and bedding producers
- Packaging manufacturers
- Industrial assembly operations
Performance Advantages
Within the water-based adhesive category, TacBond C6010 offers a balance of quick drying performance, soft bond line characteristics, and broad substrate compatibility. Its non-flammable, low VOC formulation supports safer application conditions while maintaining efficient processing and reliable bonding for flexible and porous materials. :contentReference[oaicite:1]{index=1}
Ordering Information
| Part Number | Size |
|---|---|
| TB-C6010-05 / TB-C6010BU-05 | 5 Gallons |
| TB-C6010-110 / TB-C6010BU-110 | 110 Gallons |
| TB-C6010-275 / TB-C6010BU-275 | 275 Gallons |
Common Questions
Q: What type of adhesive is TacBond C6010?
A: It is a water-based, non-flammable contact adhesive designed for foam, fabric, and porous materials.
Q: How is it applied?
A: It can be applied by spray, roller, or brush depending on the application.
Q: What is the dry time?
A: It has an initial grab with approximately 30 minutes required for full dry.
Q: How long is the open time?
A: The open time is 2 hours or more.
Q: What surfaces can it bond?
A: It bonds foam, fabric, wood, plastic, rubber, leather, cardboard, and other porous materials.
Q: How is cleanup handled?
A: Cleanup can be done with water or a detergent solution.
Q: Is it flammable?
A: No, it is classified as non-flammable.
Q: What is the VOC content?
A: VOC content is less than 5 g/L.
Reviews
There are no reviews yet.