Description
TacBond S5847 Flammable Foam & Laminate Spray Adhesive is a fast-drying, synthetic rubber-based contact adhesive designed for foam fabrication and decorative laminate bonding. Engineered for high initial tack and strong green strength, this adhesive supports efficient bonding processes with a long open time for precise positioning in industrial and upholstery applications.
Key Features
- Flammable synthetic rubber contact adhesive for foam and laminate bonding
- Fast-drying formulation supports efficient production workflows
- High initial tack promotes immediate bond formation
- Strong green strength for reliable handling during assembly
- Long open time allows repositioning and alignment before bonding
- Designed for spray, brush, or roll application methods
- Suitable for foam fabrication and decorative laminate applications
Technical Specifications
| Specification | Value |
|---|---|
| Base | Synthetic rubber |
| Color | Clear, Red |
| Viscosity | 200 cPs |
| Solids Content | 34.8% |
| Weight per Gallon | 7.93 lbs |
| Open Time | Up to 1 hour |
| VOC Content | 96 g/L |
Compatible Substrates and Materials
- Foam
- Decorative laminates
- Fabric and textiles
Application Guidance
Apply only to clean, dry surfaces and maintain substrate and adhesive temperatures above 60°F for optimal bonding performance. Apply a smooth, uniform coat using spray, brush, or roll methods, and allow the adhesive to dry before bonding. Join surfaces with sufficient pressure to ensure full contact. Dry time and coverage will vary depending on application method and environmental conditions such as temperature and humidity.
Typical Use Cases
- Foam fabrication and assembly
- Decorative laminate bonding
- Upholstery and seating production
- General-purpose industrial laminating
Target Industries and Buyers
- Foam fabricators
- Furniture and upholstery manufacturers
- Interior fixture and panel manufacturers
- Industrial assembly operations
Performance Advantages
Compared to other solvent-based contact adhesives, TacBond S5847 offers a balance of fast drying speed, strong initial tack, and extended open time, allowing for both efficient processing and precise material placement. Its synthetic rubber formulation provides dependable bonding performance for foam and laminate applications where flexibility and handling strength are required.
Common Questions
Q: What is TacBond S5847 used for?
A: It is used for bonding foam, laminates, and similar materials in fabrication and upholstery applications.
Q: Is this adhesive flammable?
A: Yes, it is classified as a flammable adhesive and should be used with appropriate precautions.
Q: How is it applied?
A: It can be applied by spray, brush, or roller depending on the application.
Q: What is the open time?
A: The open time is up to approximately one hour.
Q: What type of adhesive base does it use?
A: It is a synthetic rubber-based adhesive.
Q: What conditions are recommended for application?
A: Surfaces should be clean and dry, and application should be done above 60°F.
Q: What industries typically use this product?
A: It is commonly used in foam fabrication, upholstery, and laminate bonding industries.
Q: Does it require pressure to bond?
A: Yes, firm pressure is required to ensure proper contact and bond strength.
Reviews
There are no reviews yet.