Description
TacBond S5850 Canister Adhesive is a non-methylene chloride canister contact adhesive designed for industrial bonding and laminating applications. This sprayable adhesive delivers a web spray pattern, high solids content, and portable canister dispensing for laminates, wood-based panels, leather, rubber, and select metal bonding in fabrication, assembly, and shop production environments.
Key Features
- Non-methylene chloride contact adhesive for industrial spray bonding applications
- Canister-based system supports portable adhesive application in shops and field settings
- High solids formulation helps extend coverage and adhesive mileage
- Soft web spray pattern allows controlled application and coat build
- Short dry time supports efficient assembly workflows
- Extended open time provides working flexibility during positioning and layup
- Suitable for laminating and bonding a range of common fabrication substrates
- Assembly can be trimmed or routed immediately after bonding
Technical Specifications
| Specification | Value |
|---|---|
| Product Type | Canister contact adhesive |
| Application Pattern | Web |
| Dry Time | 2-3 minutes |
| Open Time | 30-45 minutes |
| Available Colors | Natural, Red and Green |
| Coverage Rate | 2.5-3.0 dry grams/sq. ft. minimum |
| Recommended Coat Weight | 2.5-3.0 dry grams/sq. ft. minimum |
| Recommended Coverage on Substrate | 80-100% |
| Recommended Application Distance | 6-10 inches (150-250 mm) |
| Bonding Pressure | 40-60 PLI |
| Trim / Route Readiness | Immediately after bonding |
| Full Bond Strength | 24-48 hours |
| Shelf Life | 1 year in unopened container |
| Storage Temperature | 60-90°F |
| VHAP | VHAP Free |
| Clean Up | CBA689 Citrus Cleaner (gun/hose) |
Compatible Substrates and Materials
- Laminates
- Particle board
- Plywood
- Hardwood
- Leather
- Rubber
- Metal
Application Guidance
Bonding surfaces should be clean and free of dust, dirt, and grease before application. Spray from 6-10 inches away at a 90° angle to the substrate and apply a consistent coating that avoids puddling, targeting 80-100% coverage at 2.5-3.0 dry grams per square foot. For porous surfaces and exposed edges, apply two coats and allow the adhesive to dry fully until tacky without transfer before assembly. Position parts carefully and apply 40-60 PLI using a nip roller or a properly used 3-inch J-roller. Full bond strength develops in 24-48 hours depending on temperature and humidity. Do not use with plasticized vinyl, flexible plastics, expanded or extruded polystyrene, polyethylene, polypropylene, or copper/copper alloy substrates, and avoid spray equipment containing aluminum or copper components.
Typical Use Cases
- Laminate bonding in shop fabrication
- Panel and wood composite bonding
- Countertop and fixture laminating
- Leather and rubber bonding applications
- General contact adhesive work in portable canister spray systems
- Trim, routing, and post-bond fabrication workflows
Target Industries and Buyers
- Millwork and woodworking shops
- Cabinet and fixture manufacturers
- Laminating and fabrication facilities
- OEM assembly operations
- Interior build-out and commercial construction trades
- Industrial maintenance and production teams
Performance Advantages
Within the canister contact adhesive category, TacBond S5850 combines portable spray delivery, fast dry time, and a relatively long open time to support efficient layup and positioning. Its high solids content and web spray pattern make it suitable for controlled adhesive application across common laminating and fabrication substrates, while allowing bonded assemblies to be trimmed or routed immediately after joining.
Ordering Information
| Part Number | Pack Size |
|---|---|
| TB-S5850-30 | 30 lbs. |
| TB-S5850-140 | 140 lbs. |
| TB-S5850-300 | 300 lbs. |
Common Questions
Q: What type of adhesive is TacBond S5850?
A: It is a non-methylene chloride canister contact adhesive.
Q: What substrates is it used on?
A: Documented substrates include laminates, particle board, plywood, hardwood, leather, rubber, and select metal surfaces.
Q: How long is the dry time?
A: Typical dry time is 2-3 minutes.
Q: How much working time does it provide?
A: The listed open time is 30-45 minutes.
Q: When does full bond strength develop?
A: Full bond strength is achieved after 24-48 hours, depending on temperature and humidity.
Q: Can the bonded assembly be trimmed right away?
A: Yes. The bonded assembly can be trimmed or routed immediately after bonding.
Q: Are there materials it should not be used on?
A: Yes. It is not recommended for plasticized vinyl, flexible plastics, expanded or extruded polystyrene, polyethylene, or polypropylene. Copper and copper alloy substrates should also be avoided.
Q: How should it be stored?
A: Store between 60°F and 90°F, out of direct sunlight, and use oldest stock first.
Reviews
There are no reviews yet.