Description
TacBond S5910 Bulk Contact Adhesive is a high-solids, spray-grade contact adhesive designed for industrial laminating, bonding, and assembly applications. This methylene chloride-free adhesive is formulated for bulk application systems, delivering strong initial grab, high heat resistance, and consistent spray performance across a wide range of substrates used in fabrication and OEM manufacturing.
Key Features
- High-solids spray-grade contact adhesive for efficient bulk application
- Methylene chloride-free formulation for regulated industrial use
- Strong green strength for immediate handling and processing
- High heat resistance supports demanding bonding environments
- Consistent web spray pattern for controlled and uniform coverage
- Excellent adhesion across common laminating and assembly substrates
- Non ozone-depleting formulation
- Designed for room temperature bonding with reliable performance
Technical Specifications
| Specification | Value |
|---|---|
| Dry Time | 2–5 minutes |
| Open Time | 30 minutes |
| Color | Natural, Green |
| Flash Point | >93°C |
| VOC | 740 g/L |
| Coverage Rate | 489 sq. ft./gallon (unbonded); 244.5 sq. ft./gallon (bonded) |
| Clean Up | NBP cleaner |
| Shelf Life | 1 year (unopened container) |
| VHAP | 2.75 lbs/lbs of solids |
| Spray Pattern | Web |
| Solids | 27% |
Compatible Substrates and Materials
- Laminates
- Particle board
- Plywood
- Hardwood
- Leather
- Rubber
- Metal
Application Guidance
Ensure substrates are clean, dry, and free of contaminants prior to application. Apply adhesive evenly at recommended coverage levels to achieve approximately 80% surface coverage, allowing it to dry completely before bonding. For porous materials, apply two coats to ensure proper sealing and adhesion. Bond within the open time window and apply uniform pressure (approximately 40 PLI) using appropriate rollers. Avoid use with aluminum or copper equipment and do not apply to polystyrene foams or plasticized vinyl. Adequate ventilation is recommended during use.
Typical Use Cases
- High-pressure laminate bonding to wood substrates
- Cabinet and furniture panel assembly
- General industrial laminating applications
- Bonding rubber, leather, and metal components
- Bulk adhesive systems in fabrication facilities
Target Industries and Buyers
- Cabinet and furniture manufacturers
- Millwork and woodworking shops
- Industrial laminators
- OEM manufacturers
- General fabrication facilities
Performance Advantages
Compared to lower-solids or hand-applied contact adhesives, TacBond S5910 provides improved coverage efficiency, stronger initial bond strength, and consistent spray application in bulk systems. Its higher solids content supports better film build and durability, while maintaining process efficiency for large-scale laminating and assembly operations.
Ordering Information
- TB-S5910-1 – 1 Gallon
- TB-S5910-5 – 5 Gallon
- TB-S5910-54 – 54 Gallon
Common Questions
Q: What type of adhesive is TacBond S5910?
A: It is a bulk, spray-grade contact adhesive designed for industrial bonding and laminating.
Q: What is the typical dry time?
A: The adhesive dries in approximately 2–5 minutes before bonding.
Q: How long is the open time?
A: The open time is about 30 minutes, depending on conditions.
Q: Can it be used on all plastics?
A: No, it should not be used on polystyrene foams or plasticized vinyl.
Q: Is it suitable for porous substrates?
A: Yes, but two coats are recommended to ensure proper sealing and adhesion.
Q: What pressure is required for bonding?
A: Approximately 40 pounds per linear inch (PLI) is recommended for optimal bonding.
Q: What cleanup solvent is recommended?
A: NBP cleaner is recommended for cleanup.
Q: Does it require ventilation during use?
A: Yes, it should be used in a well-ventilated area.
Reviews
There are no reviews yet.