Description
TacBond S5970 Flammable Foam & Laminate Spray Adhesive is a fast-drying, synthetic rubber-based contact adhesive designed for foam fabrication and decorative laminate bonding. Engineered for high initial tack, strong green strength, and long open time, this adhesive supports efficient bonding processes in upholstery, fabrication, and industrial assembly applications.
Key Features
- Flammable spray-grade contact adhesive for foam and laminate bonding
- Synthetic rubber formulation for consistent adhesion performance
- High initial tack supports immediate bond formation
- Strong green strength for reliable handling after bonding
- Long open time allows repositioning and precise alignment
- Fast-drying formulation improves workflow efficiency
- Suitable for spray, brush, or roll application methods
- Designed for foam fabrication and decorative laminate applications
Technical Specifications
| Specification | Value |
|---|---|
| Base | Synthetic Rubber |
| Color | Clear |
| Viscosity | 200 cPs |
| Solids Content | 36.6% |
| Weight per Gallon | 7.99 lbs |
| Open Time | 1 hour |
| VOC Content | 0 g/L |
| Solvent System | Methyl Acetate |
Compatible Substrates and Materials
- Foam
- Decorative laminates
- Fabric and textiles
- Wood substrates
Application Guidance
Apply only to clean, dry surfaces and maintain both adhesive and substrates above 60°F for optimal bonding. Apply a smooth, uniform coat using spray, brush, or roll methods, ensuring adequate coverage. Allow adhesive to flash off before bonding, then apply firm, even pressure to achieve full contact. Drying time and coverage will vary based on application method and environmental conditions such as temperature and humidity.
Typical Use Cases
- Foam fabrication and assembly
- Decorative laminate bonding
- Upholstery and seating production
- Panel and surface laminating
- General industrial bonding applications
Target Industries and Buyers
- Foam fabricators and converters
- Furniture and upholstery manufacturers
- Mattress and bedding producers
- Cabinet and laminate shops
- Industrial assembly operations
Performance Advantages
Within the spray adhesive category, TacBond S5970 provides a combination of fast drying speed, strong initial tack, and extended open time, allowing for both efficient processing and accurate material placement. Its synthetic rubber formulation supports consistent bonding performance across foam, laminate, and fabric applications where flexibility and handling strength are required.
Common Questions
Q: What is TacBond S5970 used for?
A: It is used for bonding foam, laminates, fabric, and similar materials in fabrication and upholstery applications.
Q: Is this adhesive flammable?
A: Yes, it is classified as a flammable adhesive.
Q: How is it applied?
A: It can be applied by spray, brush, or roller.
Q: What is the open time?
A: The open time is approximately 1 hour.
Q: What type of adhesive base does it use?
A: It is a synthetic rubber-based adhesive.
Q: What color is the adhesive?
A: It is clear.
Q: What temperature should be maintained during application?
A: Substrates and adhesive should be maintained above 60°F.
Q: What affects drying time?
A: Drying time can vary based on application method, temperature, and humidity conditions.
Reviews
There are no reviews yet.