TAH 160-AN824 Spiral Bell Static Mixer, Nordson EFD Fit

Description

The TAH 160-AN824 mixer is a Series 160 spiral bell static mixer with a bell-style inlet that mates directly to Nordson EFD valve manifolds and large-volume two-component cartridges that port the A and B materials separately into the mixer body. The bell geometry handles the wider A and B inlets that larger meter-mix systems and dual-valve dispensers run, keeping flow split clean as material enters the spiral elements without dead spots or backflow into the other channel.

Where TAH 160-AN824 mixer fits

Used on Nordson EFD meter-mix systems and on the bulk-volume cartridge style where the A and B fluids are dispensed through separate ports rather than a side-by-side coaxial cartridge. Typical applications include high-volume potting and encapsulation in electronics, structural epoxy bonding off bulk pails, meter-mix dispensing of polyurethanes and silicones on production lines, and any setup where the dispensing volumes outstrip what a hand-loaded coaxial cartridge can keep up with.

How TAH 160-AN824 mixer holds up

The plastic spiral element delivers consistent A-B blending at the flow rates typical of valve manifolds and large-volume cartridges. Disposable construction means the mixer is changed out when working life is reached or between material changeovers, which avoids the clean-out cycles a permanent mixer would require. The bell inlet wipes clean by simply removing the mixer and wiping the manifold face, a faster maintenance step than disassembling a screwed-on mixer body. Operators carry a stock of mixers at the workstation and swap in seconds.

Specs

For other mixer styles and matching guns and cartridges, see the dispensers, mixers, and nozzles catalog. For the full Nordson EFD valve and manifold line, see Nordson.

Need Help?

Need help matching the right TAH 160-AN824 mixer count to your dispense volume or confirming manifold fit? Call (800) 220-1966 or email [email protected].