Description
Nordson EFD 180A-818 Turbo Static Mixer Nozzle is a single-use mixer for two-part adhesive and sealant cartridges. This disposable static mixer uses an 18-element 180A layout and a compact body so operators can get closer to the workpiece while still blending material before it reaches the bead.
Disposable Static Mixer Benefits
- Single-use format keeps cured adhesive out of the line and cuts cleanup between cartridge changes.
- 18 internal elements help bring Part A and Part B together before dispense at the outlet.
- Compact body is easier to position in tighter bond areas, corners, and smaller repair zones.
- Stepped outlet supports controlled bead placement for hand work and bench assembly.
- Nordson notes that static mixer choice affects mix quality, discharge force, and cartridge fit.
Chemical Concepts lists this mixer as TAH 180A-818, part 7701353. A current industrial mixer listing for the Nordson 180A series identifies the 180A-818 with 18 elements, an 8.70 mm element diameter, 13.0 cm body length, 11.68 mm outside diameter, and a 3.05 mm stepped outlet. Those dimensions make it a practical consumable for general two-part cartridge work where mix quality matters but a longer mixer would be awkward.
Common Applications for Disposable Static Mixer
- Cartridge dispensing of two-part epoxies, acrylics, urethanes, and sealants.
- Shop assembly where a fresh mixer is used for each job or shift.
- Maintenance repair work that needs a clean nozzle and predictable bead placement.
- Fabrication benches where the operator needs to work close to the bond area.
Compatible Materials
- Two-part cartridge adhesives.
- Two-part cartridge sealants.
- Applications where static mixers are preferred over hand mixing.
- Processes that benefit from disposable nozzles and lower cleanup time.
Disposable Static Mixer Technical Specifications
| Property | Value |
|---|---|
| Brand | Nordson EFD |
| SKU | TAH180A-818 |
| Manufacturer Part Number | 7701353 |
| Series | 180A |
| Mixing Elements | 18 |
| Body Length | 13.0 cm |
| Outlet | 3.05 mm stepped outlet |
Packaging and Ordering
Keep this mixer in stock when your crew needs a short, replaceable nozzle for two-part cartridge work and does not want cured material sitting in the tip between jobs. Browse our dispensers, mixers, and nozzles category for related sizes, and review mixing guidance from Nordson EFD.
Need Help?
If you need help matching this mixer to a cartridge, ratio, or adhesive viscosity, call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.