Description
The Techcon TE715050B90PK dispensing needle is a 15 gauge bent TE Series tip for controlled placement of adhesives, coatings, solvents, and other compatible production fluids. Its 1/2 inch stainless cannula is formed at 90 degrees so operators can direct material sideways into a joint, tray, or tight access point.
Dispensing Needle Fit and Flow
This TE Series bent dispensing tip uses a stainless steel cannula with a double-helix polypropylene hub that locks onto compatible syringe barrel threads. The 15 gauge bore supports heavier flow than smaller needle sizes, while the right-angle geometry keeps the barrel clear of adjacent parts and fixtures. Teams often stock dispensing tip sizes beside mixing nozzle and 2 part mixing nozzle inventory so the full bench is ready for one-part and two-part packages.
Dispensing Needle Specifications
| Property | Value |
|---|---|
| SKU | TECTE715050B90PK |
| Manufacturer part | TE715050B90PK |
| Gauge | 15 gauge |
| Length | 1/2 in |
| Bend angle | 90 degrees |
| Quantity | 50 |
| Series | TE bent dispensing tip |
Choose this bent 15 gauge tip when access angle and flow matter more than a very fine bead. Keep tips clean before use, match the gauge to the fluid, and discard tips that contain cured material or visible damage. Browse related dispensers, mixers, and nozzles, and review current manufacturer background from Techcon.
Need Help?
Need help matching a dispensing needle to fluid viscosity, access angle, or syringe barrel setup? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.