Techcon TE 30 Gauge 90 Degree Bent Dispensing Needles, 50 Pack

Description

The Techcon TE730050B90PK dispensing needle is a 30 gauge bent stainless tip with a 1/2 inch tube, 90 degree bend, and color-coded polypropylene hub. The 50 pack is built for fine dots, small beads, and close-access fluid placement where a straight tip blocks the operator’s view or cannot reach the target cleanly.

Where this dispensing needle fits

A 30 gauge outlet is for fine placement, not high-flow dispensing. Use it with compatible syringe barrels, valves, or luer-style fittings when small adhesive, solvent, primer, oil, ink, or coating deposits need to land exactly where the work instruction calls for them. The 90 degree bend helps the operator approach from the side of a fixture, under a lip, or around a component while keeping the barrel and hand clear of the sight line.

TE bent tips use a stainless steel cannula and double-helix polypropylene hub. The premium TE line is burr-free and electro-polished for consistent material flow. The hub is silicone free and chloride free, which helps reduce contamination concerns in adhesive, electronics, medical device, and precision assembly work.

How this dispensing needle handles tight work

Install the tip after confirming gauge, length, and bend angle. Purge a short shot before touching the part, then orient the bend toward the joint. Fine gauges create restriction, so do not solve a clog by raising pressure until bead shape becomes unpredictable. If flow tails, pulses, or stops, change the tip and check material viscosity. For related needles, barrels, adapters, and valves, browse dispensers, mixers, and nozzles.

Techcon TE730050B90PK dispensing needle specs

Choose this tip for fine, side-access dispense points where a straight needle cannot land the bead cleanly. For current manufacturer information, visit Techcon.

Need Help?

Need help selecting gauge, bend angle, or tip length for a tight assembly? Call (800) 220-1966 or email [email protected].