Techon TS-P Series Flexible Tips, 18 Gauge x 1 1/2, TS18P-1-1/2

Description

Techcon TS-P flexible tips give dispensing access to hard-to-reach areas that a rigid needle cannot bend into, with the added benefit of letting the operator customize working length by trimming the tip. This 18 gauge size runs 1-1/2 in long and ships 50 to a pack for production dispensing lines.

Why Techcon TS-P Flexible Tips Resist Clogging

The flexible body resists cyanoacrylate clogging better than a rigid metal needle, since the material does not build up the same way at bends and direction changes. The tips are also silicone and chloride-free, which matters on substrates that cannot tolerate silicone contamination or chloride residue near the bond line, and they carry a maximum operating pressure of 100 psi (6.9 bar) for consistent dispensing under typical shop air pressure.

Where Techcon TS-P Flexible Tips Get Used

Assembly lines running cyanoacrylate, light oils, or other low-viscosity fluids into recessed or angled features reach for this tip when a straight needle cannot reach the target without repositioning the part. Electronics assembly, sign fabrication, and general manufacturing dispensing stations are common settings, especially where the substrate itself would be damaged by a rigid metal tip forcing its way into a tight opening. Trim the tip to the exact working length needed for a given feature, since the flexible body cuts cleanly with a razor blade or utility knife without fraying at the cut edge.

Order the 50-pack for production dispensing stations that need a steady supply of flexible tips on hand. Browse the full dispensers, mixers, and nozzles line from Chemical Concepts for other gauges and lengths. For manufacturer specifications on the TS-P Series, see Techcon.

Need Help?

Need help matching tip gauge to your fluid viscosity? Call (800) 220-1966 or email [email protected].