Description
The Techcon internal retaining ring is a 1/2 inch service component used where a compatible equipment assembly specifies an internal ring and matching groove. The ring retains a component inside a bore or housing after it is seated in the designated groove. Correct size and placement are essential because a ring that is not fully engaged may not provide the intended retention.
Where the Techcon internal retaining ring Fits
Internal retaining rings compress for insertion into a bore and expand into an internal groove. This small component may be used during repair or rebuild work on compatible precision dispensing equipment. Select it from the exact service diagram so the ring diameter, cross section, material, and groove relationship match the original assembly.
Selection and Installation Checks
Before removal, note the ring orientation and the order of adjacent components. Wear eye protection and control the ring with the correct internal-ring pliers because spring tension can release suddenly. Clean and inspect the groove for wear, burrs, or packed residue. Compress the replacement only as much as needed for insertion. After placement, inspect the full circumference and confirm that the ring is seated in the groove. Reassemble the equipment in the specified order and verify free movement or retained position as required before operating the station.
Specifications
| Property | Detail |
|---|---|
| Part Number | TSD1120-6 |
| Component Type | Internal retaining ring |
| Nominal Size | 1/2 inch |
| Installation Location | Internal groove in compatible bore |
| Service Use | Replacement retention hardware |
| Selection Basis | Exact equipment parts diagram |
Order the Techcon internal retaining ring only after confirming the exact equipment callout. Nominal bore size alone may not establish ring thickness, groove dimensions, or material. When an old ring is available, compare it with the service information but do not reinstall a ring that is bent, overstretched, corroded, or unable to seat securely in the groove.
Browse related dispensers, mixers, and nozzles for compatible system components. Visit Techcon precision dispensing resources for manufacturer-level equipment context.
Need Help?
Call (800) 220-1966 or email [email protected] with the equipment model, parts-diagram reference, and process details for selection help.
Reviews
There are no reviews yet.