Techcon KK Crimp Terminal, 18-24 AWG Wire

Description

The Techcon KK crimp terminal is a small electrical service component for dispensing equipment wiring. These dispenser parts are used when a repair or rebuild calls for an 18 to 24 AWG crimp terminal instead of replacing a larger controller, valve, or harness assembly.

Where dispenser parts fit

Use this terminal when the service task is focused on a wire connection inside a compatible Techcon dispensing product. The part is not a material-contact nozzle or cartridge component. It belongs in the electrical side of the equipment, where terminals help connect low-voltage control wiring, accessories, or internal harness work during maintenance.

Because it is a small connector, the important checks are wire gauge, terminal family, crimp quality, and the mating connector. A loose crimp can create intermittent operation that looks like a controller problem, so replacing the correct terminal can be the cleanest repair path. Terminal crimp specifications call for wire gauge and insulation diameter to fall within the connector manufacturer’s rated range; using an out-of-range wire gauge in the same terminal family risks a weak mechanical and electrical connection at the crimp point.

During setup, strip wire to the terminal manufacturer’s crimp range, inspect the conductor grip, and tug-check the finished connection before reinstalling a cover. Keep the terminal separated from fluid-contact consumables so electrical repairs and material-path changes do not get mixed at the bench.

dispenser parts specifications

For ordering, match the terminal callout to the service drawing before crimping, and keep electrical service parts like this terminal separate from fluid-path consumables when building a repair list. Browse related dispensers, mixers, and nozzles. Current Techcon equipment information is available from Techcon.

Need Help?

Need help matching a terminal to a Techcon controller or dispenser repair? Call (800) 220-1966 or email [email protected].