Techcon TS25C 2.5 oz Green Dispensing Cartridge

Description

The Techcon TS25C dispensing cartridge is a 2.5 oz (74 mL) high-density polypropylene cartridge molded in green for fast visual identification on the bench. It runs on the same standard cartridge platform Techcon builds across its 2.5 oz to 1/10 gallon sizes, so operators switching between colors and capacities keep one dispensing setup.

Where this cartridge fits

Electronics assembly, medical device, and general industrial benches use the small 2.5 oz size for low-volume shots of adhesive, sealant, or grease where a full 1/10 gallon cartridge would sit mostly unused before the material ages out. The green color lets a line separate this material or step from a natural or black cartridge running nearby, cutting mix-ups on multi-step assemblies. It runs in hand-held or bench-mounted air-powered or manual dispensing tools at up to 100 psi, the same pressure rating carried across the rest of the standard cartridge sizes.

How this cartridge performs

High-density polypropylene construction gives the cartridge wall enough rigidity to hold shape under dispensing pressure while staying disposable and low-cost between jobs. Because the barrel and color molding are integral, the green marking will not wear, scratch, or peel off during handling the way an applied label can. Benches running more than one material or process step can assign green to a specific station or material and keep that color reserved across every batch, so a quick glance at the cartridge confirms the right material is loaded before a shot goes down.

Techcon TS25C dispensing cartridge specs

Match this cartridge to compatible end caps, plungers, and nozzles from the same standard cartridge line. For related dispensing hardware, browse dispensers, mixers, and nozzles. For current manufacturer information, visit Techcon.

Need Help?

Need help picking cartridge size and color-coding for a multi-step process? Call (800) 220-1966 or email [email protected].