Techcon 400 Series 60cc Wiper Piston, White

Description

The Techcon 400 Series 60cc wiper piston is a white polyethylene piston built to seal and dispense fluid from a 60cc syringe barrel, the largest volume in the 400 Series line, without drip or waste between shots.

Where a 60cc Syringe Barrel Wiper Piston Gets Used

This piston fits Techcon’s 60cc air-powered barrels in the 400 Series line (barrel family 460LL), the size shops reach for when a job runs through fluid faster than a 10cc or 30cc barrel can keep up with, cutting down how often an operator has to stop and reload mid-shift. Potting, encapsulation, and larger-format electronics assembly lines use the 60cc size for exactly that reason, running longer stretches between barrel changes on higher-volume dispense jobs. A shop standardizing on one syringe barrel size across several stations often picks 60cc first, then adds smaller barrels only where a job genuinely needs finer control.

How the 60cc Syringe Barrel Piston Holds Up

The polyethylene body is silicone-free, so it will not contaminate sensitive electronic or medical-adjacent fluids, and the wiping edge keeps the bore clean across the full stroke length a 60cc barrel demands. Because it is air-operated rather than manual, the controller drives a consistent stroke from the first dispense to the last, so bead size and shot volume do not drift with hand fatigue over a long run. That consistency matters more as barrel size grows, since a 60cc stroke covers far more travel than a 3cc or 10cc piston ever will.

Specs

Stock the 60cc piston alongside matching barrels so a higher-volume job never runs short mid-shift. Browse Chemical Concepts dispensing supplies for compatible barrels and receiver heads, and see the Techcon product line for the full 400 Series dispensing system.

Need Help?

Need help sizing barrels and pistons for a higher-volume dispensing job? Call (800) 220-1966 or email [email protected].