Techcon TS7000 16-Pitch Feed Screw, A-2 Tool Steel

Description

The Techcon TS7000 16-pitch feed screw is an A-2 tool steel dispensing valve parts replacement for TS7000 rotary auger valve maintenance. It belongs in the valve drive and material path service kit, where the feed screw controls metered fluid movement through the TS7000 platform during adhesive, sealant, coating, and paste dispensing.

dispensing valve parts for TS7000 metering

Rotary auger valves depend on the feed screw and chamber to move material at a controlled rate. A worn or damaged screw can change output, create inconsistent dots, or make a bead drift from the process window. Replacing the screw with the correct pitch helps restore the valve to the expected metering setup without replacing the entire valve body.

The 16-pitch option is part of the TS7000 feed screw family, which Techcon documentation describes alongside 8-pitch, high output 8-pitch, and 32-pitch configurations. Keep the pitch matched to the valve setup and process record before installation. If the maintenance cart also stocks mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle items, store those consumables separately from rotary valve drive hardware to avoid grabbing the wrong repair part.

dispensing valve parts specifications

Before reassembly, compare the removed screw to the replacement and check for residue in the chamber. Record the pitch on the service sheet so future maintenance teams know whether the valve was built for 16P output or another TS7000 screw option.

Inspect the chamber, seals, thrust hardware, and tip interface during the same service event so a new screw is not installed against worn companion parts. For adjacent valve service items, browse dispensers, mixers, and nozzles. Techcon rotary valve information is available from Techcon.

Need Help?

Need help matching TS7000 pitch, chamber, or controller setup? Call (800) 220-1966 or email [email protected].