Techcon TS7000 IMP Metal Needle Locking Cap

Description

The Techcon TS7000 metal needle locking cap is a dispensing needle related service part for the TS7000 IMP rotary valve. It helps secure the outlet-side needle or tip hardware on the valve body so the dispense path stays seated while the auger valve meters material through the Luer lock outlet.

Where This Dispensing Needle Cap Fits

The TS7000 Series IMP rotary valve is used for controlled dispensing of higher-viscosity fluids from a mounted valve head. The valve uses a feed screw to move material through an interchangeable material path, then out through the tip area. This locking cap belongs at that outlet hardware point, where small parts have to stay aligned through repeated cycles, cleaning, and tip changes.

Use the cap when the original outlet hardware is worn, missing, damaged, or being replaced as part of a valve rebuild. A loose or damaged cap can create setup problems that look like material issues: inconsistent dots, movement at the tip, or leakage around the outlet after a cycle.

How a Dispensing Needle Cap Supports Output

Tip retention matters because the valve can exceed high cycle rates in production service, and even a small amount of movement at the outlet can show up in bead placement. The cap keeps the dispensing needle connection stable while the feed screw, cartridge body, and controller do the metering work. It is a small part, but it protects a process that depends on repeatable alignment.

Locking Cap Specs

This part is for the valve outlet area. It is not a 2 part mixing nozzle, static mixer, or cartridge mixer. Browse Chemical Concepts dispensers, mixers, and nozzles for related TS7000 hardware, dispensing tips, and service parts. For the TS7000 valve family, visit Techcon.

Need Help?

Need help identifying the correct outlet hardware for a TS7000 valve? Call (800) 220-1966 or email [email protected].