Techcon 20oz Cartridge Holder

Description

The Techcon 20 oz cartridge holder is one of the dispensing valve parts Chemical Concepts keeps in stock for shops running larger two-component cartridge systems. Sized for standard 20 oz cartridges, roughly 591 mL, this aluminum retainer twist-locks into a matching retainer cap and cartridge adapter, giving high-volume dispensing lines a secure connection that will not loosen or leak mid-run.

Why This Dispensing Valve Parts Upgrade Matters for 20 oz Runs

Moving from a 1/10 gallon cartridge up to a 20 oz cartridge means fewer changeovers per shift, but it also means more pressure and more material weight riding on the retainer itself. Techcon builds this holder from machined aluminum rather than plastic so it holds its shape under the higher loads a 20 oz cartridge puts on the connection point. A viewing slot along the barrel lets an operator check remaining fluid at a glance, and the retainer carries the same 100 psi rating used across the Techcon cartridge line, so it handles thick epoxies, polyurethanes, and structural acrylics without flexing.

Dispensing Valve Parts That Work Together

This 20 oz holder is designed to pair with a Techcon retainer cap and cartridge adapter sized for the same cartridge, so shops standardizing on 20 oz cartridges should confirm they have the matching cap and adapter on hand before ordering. Chemical Concepts carries the related dispensing valve parts, retaining collars, cartridge bodies, and mixing nozzles, for the full Techcon lineup, which means a fabrication shop can source every wear part for its dispensing system from one supplier instead of splitting orders across multiple vendors.

This holder shows up on assembly lines in aerospace, transportation, metal fabrication, and mold making shops where two-part adhesives and sealants run through Techcon dispensing guns daily. Because it is a drop-in replacement, a worn holder can be swapped between shifts with no need to recalibrate the rest of the dispensing setup.

See the complete Dispensers, Mixers & Nozzles category for compatible caps, collars, and nozzles. Questions about matching this holder to your cartridge and gun combination? Call (800) 220-1966 or email [email protected]. The Adhesive and Sealant Council covers how reusable dispensing hardware like this cuts down on production waste in its report on reusable adhesive dispensing systems.