Techcon 700 Series 10cc Receiver Head

Description

The Techcon 700 Series 10cc receiver head is the connecting fitting between a dispensing valve controller and a 10cc syringe barrel. It threads onto the rear of the barrel and accepts the air line running from the controller, sealing the joint with a fitted Viton O-ring so shop air reaches the piston without leaking past the connection. The result is a repeatable, accident-proof coupling that keeps dispense pressure consistent from the first shot to the last.

Where a Dispensing Valve Receiver Head Fits

Assembly lines running 700 Series syringe barrels use this receiver head anywhere a technician needs to swap barrels quickly without breaking down the air line each time. Electronics assembly, potting stations, and bench-top conformal coating setups all rely on the same coupling. Because the head accepts a standard male quick connector, an operator can pull one 10cc barrel, snap on a fresh one, and resume dispensing within seconds. The fitting is sized specifically for 10cc barrels, so it will not seat on 30cc or 55cc bodies, which keeps a rushed changeover from ending in a forced, leaking connection.

Built to Handle Repeat Changeovers

The receiver head body is machined to hold its seal through hundreds of barrel swaps. The Viton O-ring resists the solvents and curing agents common in two-part epoxies, UV adhesives, and RTV silicones, so the seal does not swell or crack after repeated contact. Rated to 100 psi, the fitting handles the air pressure most bench-top and inline controllers run without creeping or venting air at the joint. Line supervisors who run high mix-change environments keep a spare receiver head on hand since it is the one wear part in the air path that sees a new O-ring compression cycle with every barrel change.

Dispensing Valve Compatibility and Specs

Order this receiver head alongside a stock of 10cc syringe barrels and pistons so a bench or line can rotate through cartridges without waiting on a single fitting. Pair it with the matching hose-equipped assembly if the workstation needs a longer reach to the controller. Browse Chemical Concepts’ dispensing and mixing accessories for the rest of the 700 Series lineup. Techcon publishes the complete 700 Series lineup, including compatible barrels and pistons, at Techcon.

Need Help?

Need help matching this receiver head to your dispensing valve controller and barrel size? Call (800) 220-1966 or email [email protected].