Techcon 934-000-005 Spool Assembly

Description

Techcon 934-000-005 is the replacement spool assembly for TS934 and TS941 precision dispensing valves. It is an internal service component, not a complete dispensing valve. Use the exact part number when the service list calls for the spool assembly so the repair stays matched to the intended Techcon valve family.

Dispensing Valve Spool Assembly Fit

Techcon lists 934-000-005 as the replacement spool assembly for TS934 and TS941. The TS934 uses a balanced spool design for controlled on and off fluid delivery. Air pressure opens the valve, and a return spring closes it when the air signal is removed. Techcon also describes suck-back action as the valve closes to help limit material at the outlet. The replacement assembly supports that internal operating path when the original component is due for service.

How the Dispensing Valve Uses It

The spool assembly moves inside the valve body as the pneumatic signal changes. It therefore belongs inside the valve service stack with the related seals, washers, spring, and fittings specified for the exact build. Before ordering, confirm the valve model and manufacturer part number rather than choosing the component by appearance. TS934 and TS941 parts can look similar to components from adjacent valve families but are not automatically interchangeable.

Service and Ordering Checks

Depressurize the air and material sides before opening a dispensing valve, then follow the Techcon service guide and your facility’s lockout procedure. Inspect the surrounding seals and wear components while the valve is open. Keep the removed assembly available until the replacement is checked against the model, part number, and service diagram.

Techcon 934-000-005 Details

Browse related dispensers, mixers, and nozzles, or review the official Techcon 934-000-005 listing.

Need Help?

Need help confirming this spool assembly for a TS934 or TS941 dispensing valve? Call (800) 220-1966 or email [email protected].