Techcon Pyles 4 in x 1/8 in Dispensing Needle, 1000 Pack

Description

Techcon Pyles 4 inch x 1/8 inch nozzle functions as a dispensing needle for Pyles cartridge systems that need reach and a wider outlet than fine-gauge tips. The 4 inch length helps place material into channels, pockets, and fixture areas, while the 1/8 inch opening suits heavier beads of adhesive, sealant, grease, or paste.

dispensing needle reach and flow

Use this Pyles nozzle when the cartridge body cannot sit close to the work surface or when a short tip leaves the operator fighting the fixture. The longer outlet improves hand clearance, and the 1/8 inch orifice allows more flow than narrow 1/16 inch tips. That makes it useful for larger fills, gasket paths, service repairs, and production work where a consistent bead needs to land past an obstruction.

• 4 inch reach for recessed, guarded, or fixture-limited dispense points.
• 1/8 inch orifice for larger beads and higher material flow.
• Bulk 1000 pack for bench stock and repeated production use.
• Fits compatible Pyles cartridge setups that use this nozzle style.
• Disposable outlet helps reduce cleanup between materials or shifts.

dispensing needle specifications

Confirm nozzle style, cartridge thread, and material viscosity before using this outlet in production. A dispensing needle is selected for placement and flow, while a mixing nozzle or 2 part mixing nozzle is selected for material blending. If a request mentions jb weld mixing nozzle, verify whether the job needs a static mixer, a Pyles outlet, or another cartridge accessory. Browse related dispensers, mixers, and nozzles for compatible cartridge hardware. Current dispensing product family information is available from Techcon.

Need Help?

Need help matching nozzle reach, orifice size, or cartridge thread to your material? Call (800) 220-1966 or email [email protected].