Techcon TECA0100235 DMP Front Door Valve Body Assembly

Description

Techcon TECA0100235 DMP front door valve body assembly is a dispensing valve service component for DMP equipment that uses a front door body configuration. It is ordered when the existing valve body needs replacement during maintenance, repair, or rebuild work on a precision fluid dispensing station.

dispensing valve service use

The front door version supports the fluid path and access style used on the matching DMP assembly. A replacement body helps technicians keep the valve layout consistent when original hardware is worn, damaged, or contaminated beyond routine cleaning. Match the body to the existing valve, then verify fittings, seals, tips, and controller settings before the station returns to production.

dispensing valve specifications

Install the part only after confirming the station uses the same front door configuration. Clean mating parts, inspect threads and seals, and run a test dispense with the actual material. For systems that process two-part materials, confirm the static mixer, 2 part mixing nozzle, or static mixing nozzle used before the valve so the material enters the body in the correct mixed state.

Keep the part number with the job traveler or maintenance list so replacement decisions stay traceable. Match the part to the existing cartridge, valve, or station hardware before opening the package. After setup, document material name, pressure, tip or nozzle choice, first acceptable bead or shot size, and the operator notes from the test dispense so the next technician can repeat the process without guessing.

Browse related dispensers, mixers, and nozzles for valves, cartridges, fittings, tips, and mixing nozzle supplies. Current manufacturer information is available from Techcon.

Need Help?

Need help identifying the correct DMP body configuration? Call (800) 220-1966 or email [email protected].