Description
This 27 gauge dispensing needle places a fine line of adhesive, lubricant, or solvent exactly where it belongs, with a 1/2 inch stainless cannula bent 90 degrees to reach under components and into recesses a straight tip misses. The Techcon TE series hub seats on standard Luer fittings, and this listing ships 50 needles.
Where the 27 Gauge Dispensing Needle Fits
The 90 degree bend points the tip sideways or straight down so the operator can dispense beneath a board, along a wall, or into a blind pocket without rotating the part. The 0.008 inch inner diameter suits low-viscosity fluids, primers, and thin cyanoacrylates where a controlled, repeatable dot or line matters more than flow rate.
How the 27 Gauge Dispensing Needle Holds Up
The cannula is electro-polished stainless steel, burr-free, and silicone and chloride free, so it will not contaminate sensitive bonds. The double-helix polypropylene hub locks to Luer-lock barrels and syringes, and the assembly is rated for dispensing pressure up to 100 psi. Because the gauge is fine, keep the pressure moderate and let the fluid meter through the tip rather than forcing it, which protects both the bond and the needle. The pack of 50 keeps fresh tips ready when a needle clogs with cured product.
| Spec | Detail |
|---|---|
| Pack quantity | 50 needles |
| Gauge | 27 ga |
| Inner diameter | 0.008 in |
| Cannula length | 1/2 in |
| Tip angle | 90 degrees (bent) |
| Cannula material | Electro-polished stainless steel |
| Hub | Double-helix polypropylene, Luer-lock |
| Max pressure | 100 psi |
| Item number | TECTE727050B90PK |
Order this 27 gauge tip when a bent needle is the only way to reach the bond line. For more tips, needles, and static mixers, browse our dispensing nozzles and mixers, or see the full line at Techcon.
Need Help?
Need help matching needle gauge to your fluid viscosity? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.