Description
TS1050-45 spreader nozzles in this box of 1000 give high-volume shops a full carton of the angled 1/2 inch flat tip. Each nozzle lays a wide ribbon of adhesive or sealant at a 45 degree angle and threads onto standard 1/4 inch NPT cartridges, manual guns, and sealant cartridge adapters, so a line can change tips without rinsing and reusing.
Where the TS1050-45 Spreader Nozzles Earn the Carton
Buy the full box when the same flat-ribbon job runs daily: laminating, panel bonding, and edge sealing where a fresh tip per part keeps the bead clean. The 45 degree angle clears the cartridge from the surface on flat panels and countertops, and the natural polypropylene body stays non-reactive with most one-part and two-part adhesives, silicones, and sealants.
How the TS1050-45 Spreader Nozzles Hold Up
Each nozzle is molded from natural high-density polypropylene and handles dispensing pressure up to 100 psi. The flat 1/2 inch by 1/16 inch opening gives a repeatable ribbon thickness across the carton, and the 4 inch length reaches the work without flex at the tip. Buying by the box drops the per-tip cost for production runs that treat the nozzle as a single-use consumable.
| Spec | Detail |
|---|---|
| Pack quantity | 1000 nozzles |
| Spread width | 1/2 in (12.7 mm) |
| Orifice | 1/2 in x 1/16 in (12.7 x 1.59 mm) flat |
| Tip angle | 45 degrees |
| Overall length | 4 in (101.6 mm) |
| Thread | 1/4 in NPT |
| Material | Natural high-density polypropylene |
| Max pressure | 100 psi |
| Item number | TECTS1050-45-1000 |
Order the box of 1000 when a flat-ribbon application runs in volume and a fresh tip per part matters. For other bulk tips, nozzles, and static mixers, browse our dispensing nozzles and mixers, or see the full line at Techcon.
Need Help?
Need help sizing a carton quantity to your production run? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.