Techcon Fluid Line Assembly, 18 in, Female/Female

Description

This 18 in fluid line is one of the compact dispensing valve parts used to connect compatible Techcon valves, syringes, manifolds, and fittings across a short run. It uses 0.100 in ID polyethylene tubing with molded female Luer lock connections on both ends, so it can replace a worn or contaminated transfer line without rebuilding the rest of the dispensing station.

Where these dispensing valve parts fit

The short length suits bench layouts where the valve, barrel, or adaptor is close to the material source. Keeping the run short can reduce retained material volume and make changeovers cleaner, especially when an operator is switching between adhesives, coatings, greases, or sealants. The female Luer lock ends are meant for matching male Luer hardware. This line is different from a mixing nozzle, a 2 part mixing nozzle, or a jb weld mixing nozzle. It carries material through the system, while a mixer or tip controls the outlet end of the dispense path.

Techcon fluid line assemblies are supplied with molded Luer lock fittings and are made to work with standard Luer lock connectors. The published pressure rating is up to 100 psi when used with compatible components. The 0.100 in bore gives a practical balance between flow and control for many time-pressure and valve-fed setups, and the natural PE material lets operators see fluid movement, bubbles, or cured material inside the tube before the line is returned to service.

How dispensing valve parts like this are handled

• Pack quantity: 10 fluid line assemblies.
• Tube size: 0.100 in ID by 18 in long.
• Connection style: female Luer lock to female Luer lock.
• Material: natural polyethylene tubing.
• Use case: short fluid transfer between compatible dispensing components.

Before installation, confirm both mating ends are clean and that the process pressure is within the line and connector rating. Route the tubing so it is supported instead of hanging from one fitting, since strain at the fitting can create leaks or intermittent flow changes. Replace the line when it becomes cloudy, kinked, stained with cured material, or difficult to flush. For related valves, syringes, fittings, and accessories, browse Chemical Concepts dispensers, mixers, and nozzles. Techcon product family information is available from Techcon.

Need Help?

Need help checking whether female/female tubing is right for your dispense station? Call (800) 220-1966 or email [email protected].