Description
The Mixpac MFHX 06-24T is a disposable helix static mixer for 4:1 and 10:1 F-System cartridges. It has 24 mixing elements in a 6 mm bore and measures 194 mm (7.64 in) overall. It is the middle option in the 6 mm group, adding six more mixing elements than the 06-18T while keeping the same narrow bore and fine bead control. See the full MFHX line for all eleven sizes.
Specifications
| Property | Value |
|---|---|
| Model | MFHX 06-24T |
| Manufacturer part no. | 102474 |
| Mixing elements | 24 |
| Inner diameter | 6.0 mm (0.236 in) |
| Overall length | 194 mm (7.64 in) |
| Retained volume | 5.20 ml |
| Mix ratios | 4:1 and 10:1 |
| Element design | Helix, orange elements |
| Outlet tip | Stepped |
| Connection | Interlock, mounts directly to cartridge |
| Material | PP |
| Cartridge family | Mixpac F-System 200 and F-System 400 Industrial |
| Units per box | 1,400 |
| Former part number | MFX 06-24 |
Where the 06-24T fits
- Middle element count in the 6 mm group. Six more mixing passes than the 06-18T, at the cost of 38 mm more nozzle length.
- Same 6 mm bore as the rest of the 06 group, so the bead size and flow rate do not change when you step up from 18 elements.
- Retained volume of 5.20 ml, roughly 1 ml more than the 06-18T. Still low compared to the 8, 10, and 13 mm nozzles.
- A reasonable default when the material mixes normally and you want margin on blend quality without jumping to 32 elements.
- Mounts directly to the cartridge with no converter. Disposable, so no purging or cleanup between batches.
Compatible cartridges
| Cartridge system | Ratio | Fill volume |
|---|---|---|
| F-System 200 Industrial | 4:1 | 225 ml |
| F-System 200 Industrial | 10:1 | 250 ml |
| F-System 400 Industrial | 4:1 | 415 ml |
| F-System 400 Industrial | 10:1 | 490 ml |
Running a 1:1 or 2:1 cartridge instead? Use the MFH series with white elements. The ratios do not interchange.
Related MFHX sizes
| Model | Elements | Bore | Choose it when |
|---|---|---|---|
| MFHX 06-18T | 18 | 6 mm | Shortest nozzle, lowest waste, easy-mix materials |
| MFHX 06-24T (this page) | 24 | 6 mm | Fine bead with a balanced element count |
| MFHX 06-32T | 32 | 6 mm | Fine bead with the most thorough mixing |
| MFHX 08-24T | 24 | 8 mm | Same element count, higher flow and larger bead |
See the full MFHX size chart for all eleven models with lengths and retained volumes.
Common applications
- Electronics and communications assembly where a small, controlled bead is needed
- Aerospace and aircraft sub-assembly with two-part structural adhesives
- Automotive body, glass, and trim attachment with methacrylate or polyurethane
- Wind turbine blade assembly, repair, and field service
- Dispensing epoxy, polyurethane, silicone, acrylic, and MMA two-part adhesives and sealants
Ordering
The MFHX 06-24T ships in factory boxes of 1,400 and is ordered in full box quantities. Pair it with matching cartridges and dispensing guns from the dispensers, mixers, and nozzles category.
Frequently asked questions
What does MFHX 06-24T mean?
MFH is mixer, F-System, helix design. The X marks the 4:1 and 10:1 version with orange elements. The 06 is the 6 mm inner diameter. The 24 is the number of mixing elements. The T is the stepped outlet tip.
What was the old part number for the MFHX 06-24T?
This nozzle was previously sold as the MFX 06-24. The current medmix article number is 102474.
Should I use the 06-18T or the 06-24T?
Both have the same 6 mm bore, so the bead size and flow rate are the same. The 06-24T adds six mixing elements for a more thorough blend, which helps with harder-to-mix materials. The tradeoff is 38 mm more nozzle length, slightly more back pressure at the gun, and about 1 ml more material retained at changeover.
How much adhesive stays in an MFHX 06-24T?
5.20 ml, compared to 4.16 ml for the 06-18T and 6.56 ml for the 06-32T.
Will the MFHX 06-24T work on a 1:1 cartridge?
No. MFHX nozzles are built for 4:1 and 10:1 ratios. For 1:1 and 2:1 F-System cartridges, use the MFH series.
Do I need a converter to mount this nozzle?
No. The MFHX mounts directly to the F-System cartridge with an interlock connection. The older B-System mixer needed a converter to run on an F-System cartridge.
Literature and downloads
Need help?
Not sure whether 24 elements is right for your material? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.