Description
This 25ml hand syringe contains Chem-Set 633, a thixotropic two-part epoxy gel that fills gaps to 0.25 in and holds position on vertical and overhead work. The syringe dispenses both parts in equal amounts for hand mixing, and the mixing stick is built into the handle. No gun, cartridge, or static mixer is needed, which makes this the package for service calls, field repairs, small assemblies, and shops that do not run cartridge equipment.
Key Product Details
| Property | Value |
|---|---|
| Product | Chem-Set 633 5 Minute Epoxy Gel |
| Package Size | 25ml |
| Package Type | Hand syringe |
| Chemistry | Two-part epoxy |
| Consistency | Thixotropic, non-migrating gel |
| Mix Ratio | 1:1 |
| Color | Opaque |
| Working Time | 4 to 7 minutes at 72°F |
| Fixture Time | 10 to 15 minutes at 72°F |
| Gap Fill | Up to 0.25 in (6.35 mm) |
| Dispensing | Hand mix, mixing stick included on handle |
Full mechanical, thermal, and chemical resistance data is on the Chem-Set 633 product page.
Mixing This Package
Squeeze material into a small container, then mix vigorously with the stick on the handle for one full minute and apply immediately. Working time is 4 to 7 minutes total and the mixing minute falls inside that window, so have surfaces cleaned and parts ready before you start.
Working Notes
- No dispense gun, cartridge, or nozzle to carry or maintain.
- Non-sagging gel holds position on vertical and overhead bond lines.
- Suited to single joints, punch-list repairs, and jobs where a larger package would be wasted.
- Mix in batches you can place inside the working time rather than dispensing everything at once.
Common Applications
- Field and service repair bonding on metal, ceramic, and wood
- Vertical and overhead bonding
- Gap-filling joints on uneven or poorly mating surfaces
- Glue-on sink anchor mounting on granite, marble, and concrete
- Small assemblies, prototyping, and validation work
Related Products
Reviews
There are no reviews yet.