Shopping Options

Metal Bonding Adhesives

Metal-to-Metal Bonding

Metal Bonding Adhesives

Replace welds & rivets with stronger, cleaner structural bonds.

Adhesives spread load across the entire seam, reduce corrosion risks, and enable thinner, lighter designs—often with less surface prep and a lower total cost than welding or mechanical fasteners.


Metal bonding adhesives catalog

Click cover to open catalog

Why Bond Metal with Adhesives?

  • Improved strength & durability: Full-seam bonding spreads load evenly; eliminates heat-affected zones from welding; bonds completely seal the joint against water ingress and rust.
  • Design flexibility: Join thinner gauges, dissimilar metals (like aluminum to steel), and metal to composites for massive weight savings and cleaner aesthetics.
  • Lower total cost: Fewer parts, reduced need for highly skilled labor, and rapid fixture speeds that match your production line’s takt time.

Quick Picks by Use Case

Powder-Coat Lines / High Temp

Acrylics proven to survive bake cycles.

Galvanized / Pre-finished

Formulated to bite through tough coatings.

ACM / Thin Panels

Low-read-through, high flex.

  • LORD 810/20 GB — Prevents panel print-through; contains glass beads for perfect gap spacing.

Dissimilar Metals / Impact

Toughened MMAs for mixed substrates.

Large Sheet Lamination

Long open time; low shrink.

  • Ultralok 9102 — Available in bulk. Provides a very long work life for laminating massive honeycomb panels.

Low-Odor / Safer Shipping

Non-flammable, non-haz ship.

  • Araldite 2080 Series — Greatly reduces shop floor odors and simplifies hazmat shipping restrictions.

Extreme Temperature

Cures in harsh environment conditions.

Budget-Friendly Performance

Great value without losing strength.

All-Around Metal Bonders

Balanced speed, strength, and toughness.

Commonly Bonded Metals

Aluminum • Steel • Stainless • Pre-finished Metals • Galvanized • Copper • Brass • ACM / MCM

Need a Metal Bonding Recommendation?

Tell us your specific metals, if they are coated or bare, and your required fixture time. Our team will spec the perfect structural adhesive to replace your mechanical fasteners.

Metal-to-Metal Bonding

Metal Bonding Adhesives

Replace welds & rivets with stronger, cleaner structural bonds.

Adhesives spread load across the entire seam, reduce corrosion risks, and enable thinner, lighter designs—often with less surface prep and a lower total cost than welding or mechanical fasteners.


Metal bonding adhesives catalog

Click cover to open catalog

Why Bond Metal with Adhesives?

  • Improved strength & durability: Full-seam bonding spreads load evenly; eliminates heat-affected zones from welding; bonds completely seal the joint against water ingress and rust.
  • Design flexibility: Join thinner gauges, dissimilar metals (like aluminum to steel), and metal to composites for massive weight savings and cleaner aesthetics.
  • Lower total cost: Fewer parts, reduced need for highly skilled labor, and rapid fixture speeds that match your production line’s takt time.

Quick Picks by Use Case

Powder-Coat Lines / High Temp

Acrylics proven to survive bake cycles.

Galvanized / Pre-finished

Formulated to bite through tough coatings.

ACM / Thin Panels

Low-read-through, high flex.

  • LORD 810/20 GB — Prevents panel print-through; contains glass beads for perfect gap spacing.

Dissimilar Metals / Impact

Toughened MMAs for mixed substrates.

Large Sheet Lamination

Long open time; low shrink.

  • Ultralok 9102 — Available in bulk. Provides a very long work life for laminating massive honeycomb panels.

Low-Odor / Safer Shipping

Non-flammable, non-haz ship.

  • Araldite 2080 Series — Greatly reduces shop floor odors and simplifies hazmat shipping restrictions.

Extreme Temperature

Cures in harsh environment conditions.

Budget-Friendly Performance

Great value without losing strength.

All-Around Metal Bonders

Balanced speed, strength, and toughness.

Commonly Bonded Metals

Aluminum • Steel • Stainless • Pre-finished Metals • Galvanized • Copper • Brass • ACM / MCM

Need a Metal Bonding Recommendation?

Tell us your specific metals, if they are coated or bare, and your required fixture time. Our team will spec the perfect structural adhesive to replace your mechanical fasteners.

Show (per page)