Newborn VR200A83 Pneumatic Cartridge Gun, 200 mL

Description

VR200A83 pneumatic gun is a variable-ratio air dispenser for 200 mL two-part adhesive cartridges. It gives production teams controlled pneumatic push force instead of hand-trigger fatigue, while the slide-in side-load frame keeps cartridge changeover quick on bench, repair, and fabrication work.

Why the VR200A83 pneumatic gun fits 200 mL work

• Designed for 200 mL dual cartridges used with epoxies, acrylics, urethanes, and other two-part materials.
• Nominal thrust is 490 lb at 100 psi from a 2.5 inch cylinder, which helps move higher-viscosity materials.
• Snap-in and snap-out push disks support common 1:1, 2:1, 4:1, and 10:1 mix ratios without a long setup process.
• Adjustable aluminum air regulator lets the operator slow or increase bead rate for the material and joint size.
• Air dump valve stops pressure quickly so the bead does not keep creeping after the trigger is released.
• Side-load cartridge access makes this tool practical for repeated cartridge changes during production.

Where the VR200A83 pneumatic gun works best

• Fabrication shops dispensing two-part structural adhesives from 200 mL cartridges.
• Maintenance teams applying repair epoxies or urethanes where manual force is slowing the job.
• Countertop and panel assembly stations that need repeatable beads with less operator strain.
• Low-to-medium volume production cells using several cartridge ratios on the same bench.
• Field crews that want pneumatic control without moving up to a large meter-mix system.

VR200A83 pneumatic gun setup notes

Confirm cartridge volume, ratio, and plunger style before loading the dispenser. The tool is built around 200 mL cartridges, so it is a good match when a shop wants air-powered control for small dual-cartridge jobs rather than a 400 mL frame. Keep the regulator clean, set pressure low for startup, and raise pressure only as needed to maintain bead consistency.

For related cartridge guns, nozzles, and static mixers, browse Chemical Concepts dispensers, mixers, and nozzles. For broader manufacturer information on adhesive and sealant dispensing tools, visit Newborn.

Need help matching this pneumatic gun to a cartridge ratio, mixer, or adhesive family? Call (800) 220-1966 or email [email protected].