3M Trizact 568XA Hookit II White Abrasive Sheet, 11 Inch

Description

3M Trizact 568XA Hookit II white abrasive sheets use microreplicated cerium oxide mineral to deliver a repeatable, fine finish on stone, glass, concrete, and solid surface repair work. The 11 inch sheet format gives restoration crews a consistent abrasive surface for conditioning, scratch refinement, and high-finish prep.

3M Trizact 568XA Benefits

• Microreplicated abrasive structures expose fresh mineral as they wear, helping crews keep a steady cut rate during finishing work.
• Cerium oxide mineral is well suited to glass, stone, concrete, and solid surface polishing sequences.
• Hookit II attachment supports quick sheet changes when moving through grades or replacing worn media.
• Film-backed construction supports wet or dry finishing processes where the job calls for controlled scratch removal.
• White sheet format helps operators see loading, slurry, and surface debris during restoration work.

This abrasive belongs in shops that need a predictable finish rather than aggressive stock removal. Use it after coarse correction steps when the surface needs refinement before polish, seal, or inspection.

Where 3M Trizact 568XA Fits

• Stone countertop scratch refinement and finish blending.
• Concrete floor spot repair before final polishing.
• Architectural glass and window surface conditioning where approved by the process.
• Solid surface restoration work after defect removal.
• Maintenance kits that need repeatable wet finishing media.

Surface Preparation and Use

Clean the work area before sanding so loose grit does not create random scratches. Start with the grade that matches the defect, then move through the finishing sequence without skipping too far. Keep the sheet flat and use steady pressure so the abrasive structures wear evenly.

On customer-facing stone, glass, or polished concrete, test the sequence in a hidden area first. Rinse slurry between steps and replace sheets that stop cutting cleanly. For related finishing supplies, browse Chemical Concepts abrasives.

Technical Details and Documentation

3M publishes 568XA Trizact products with microreplicated cerium oxide abrasive on film backing for consistent cut and predictable fine finish. Review the current 3M product page before setting a production restoration process.

For help matching abrasive grades to stone, glass, concrete, or solid surface repair, call (800) 220-1966 or email [email protected].