Techcon 30cc Black Syringe Barrel Kit, White Wiper Piston, 50 Pack

Description

The Techcon 30cc black syringe barrel kit pairs 700 Series black polypropylene barrels with white wiper pistons for controlled dispensing from manual or pneumatic syringe equipment. The black barrel helps block light from sensitive adhesives, coatings, and fluids, while the white piston provides a tight wiping seal for low to medium viscosity materials.

syringe barrel Applications

This 50-pack is sized for maintenance benches, prototype cells, and lower-volume production areas that need a working supply without committing to a 500-pack bulk case. A 30cc capacity handles larger beads, longer potting passes, and repeated dots better than compact 10cc barrels. It is a practical format for adhesives, sealants, lubricants, conformal coatings, solder mask repair materials, and specialty compounds that are dispensed in measured shots.

The 700 Series barrel accepts compatible Techcon receiver heads, tip caps, end caps, plungers, and luer-lock dispense tips. The white wiper piston spreads pressure across the fluid column and helps limit bypass around the piston edge. That matters when a thin or medium-viscosity material would otherwise creep past a loose piston during storage, setup, or pressure cycles.

syringe barrel Handling and Setup

Choose this kit when both a black reservoir and a tight piston seal are needed in the same package. Fill the barrel from the large end, wipe excess material from the rim, and insert the piston straight. Before production use, purge into a waste cup until flow is steady and the first trapped air is gone. If bead width drifts, check piston movement, tip condition, and air pressure before changing material settings.

syringe barrel Specs

For compatible tips, caps, receiver heads, and syringe guns, browse Chemical Concepts dispensers, mixers, and nozzles. For manufacturer information, visit Techcon.

Need Help?

Need help choosing between natural, amber, and black barrel formats for your material? Call (800) 220-1966 or email [email protected].