Techcon 700 Series 3cc Syringe Barrel and Wiper Piston Kit, Black (Case of 1,000)

Description

The Techcon 700 Series 3cc syringe barrel and wiper piston kit in black pairs a total light block barrel with a white wiper piston, packed in a bulk case of 1,000 sets. Techcon ships the barrel and piston together for convenience with the piston left uninstalled, so the operator seats it fresh rather than working around however it settled in transit. The black barrel protects light sensitive fluids while the wiper piston seals tight enough for thin materials that would seep past a standard piston.

Where This Syringe Barrel Kit Is Used

• Light sensitive, low viscosity fluids such as thin UV cure adhesives and light activated coatings that need both full light block and a drip free shut-off
• High volume electronics and medical device lines running light sensitive materials where the 1,000 count case reduces restocking
• Manual dispensing with the Techcon TS700 hand-held gun, which is built around this wiper piston fit
• Any job where a standard piston would let a thin fluid weep past between shots

700 Series Syringe Barrel Kit Specifications

• Barrel capacity: 3cc
• Barrel color: Black (total light block)
• Piston type: White wiper piston, packaged separately, not pre-installed in the barrel
• Barrel material: Polypropylene, silicone and chloride free
• Piston material: Polyethylene, silicone and chloride free
• Maximum operating pressure: 100 psi (6.9 bar)
• Outlet: Luer-Lok, compatible with Techcon 700 Series receiver heads
• Pack quantity: 1,000 barrel and piston sets (bulk case)

The wiper piston wipes the barrel wall clean as it travels, cutting material waste and keeping the shut-off drip-free between dispenses, which matters more on light sensitive fluids where every drop left behind is a drop that has to be discarded. Once loaded, mount the barrel to a 700 Series dispensing valve or receiver head, or run it by hand in the TS700 manual gun, and finish with a Luer-Lok tip sized to the bead. For full manufacturer specifications on the 700 Series line, see Techcon.

Need Help?

Need help sizing a bulk order of barrel and piston kits to your production volume? Call (800) 220-1966 or email [email protected].