Techcon 430T-1 30 cc White Taper Tip Barrel

Description

The Techcon 430T-1 dispensing needle barrel is a white 30 cc 400 Series taper tip syringe barrel for controlled bench and production dispensing. It combines a molded barrel and tapered outlet in one disposable fluid path, giving operators a clean way to place adhesives, sealants, coatings, inks, greases, and similar assembly fluids without setting up a full valve station.

Where This dispensing needle Barrel Fits

This barrel fits Techcon 400 Series manual syringe assemblies and pressure-assisted dispensing setups that use matching receiver heads, pistons, and tip caps. The 30 cc size gives more capacity than 3 cc, 5 cc, and 10 cc barrels while staying manageable for hand positioning. It works well for repeated dots, short beads, small fills, and touch-up work where an operator needs a simple disposable reservoir with a built-in tapered outlet.

The taper tip helps place material into a controlled line without adding a separate metal needle or plastic tip. That can reduce setup parts on jobs where the outlet size already matches the bead requirement. It also keeps the fluid path simple for materials that cure, skin, or carry fillers that would make cleanup slow after a shift.

How This dispensing needle Component Supports Consistency

Consistent dispensing starts with a barrel, piston, and tip path that fit together correctly. A matched 30 cc barrel helps the piston move squarely so pressure spreads across the fluid charge instead of leaking around the wall. That matters when low to medium viscosity materials need repeatable starts, stops, and deposit size across multiple parts.

Techcon 430T-1 Specifications

Order this barrel when a 30 cc taper tip format fits the required bead size and material volume. Keep it with the correct piston and cap style so refill stations do not mix parts from other barrel sizes. Browse related dispensers, mixers, and nozzles for compatible barrels, pistons, plungers, receiver heads, and tips. Current dispensing component information is available from Techcon.

For production use, label storage bins by capacity and outlet style. A 30 cc taper barrel can look close to other disposable barrels at a quick glance, but the wrong size changes fill volume, piston fit, and hand feel. Matching the barrel before material is loaded prevents waste and keeps setup checks short. For carts that move between benches, pack spare caps and pistons with the barrel so a partially used fill can be paused cleanly between operations.

For receiving and setup, compare the part number on the bag or label to the station bill of materials before material is loaded. Small dispensing components often share a size family, color, or connection style, and the wrong part can appear to fit until the first test shot. Keep the old component nearby until the replacement has passed a short dry check and a controlled material test. That simple comparison helps catch fit, pressure, or alignment issues before production fluid is committed to the job, and it makes reorder notes clearer for the next maintenance cycle.

Need Help?

Need help matching barrel size, piston style, or outlet type to your material? Call (800) 220-1966 or email [email protected].