Techcon 410L-4 10 cc Manual Plunger

Description

The Techcon 410L-4 syringe barrel plunger is the clear manual push rod for 10 cc 400 Series barrels. It gives an operator direct hand control over small adhesive, coating, lubricant, or repair-fluid deposits when compressed air is not needed or not available at the workbench.

Where This syringe barrel Plunger Fits

This plunger fits manual dispensing work with Techcon 400 Series disposable components. It is a simple mechanical part, but the fit matters. A correctly matched 10 cc plunger keeps the piston moving straight through the barrel, helps reduce side loading, and gives the operator a more predictable feel during small dots, short beads, touch-up work, and sampling tasks.

Use it with a 10 cc barrel, compatible piston, tip cap, and dispense tip. It is not a pressure receiver head or a valve part. It also does not mix two-part materials by itself. If the job uses a static mixer or cartridge system, keep this plunger with the single-component bench dispensing supplies so the wrong part is not pulled during setup.

How This syringe barrel Plunger Works

Manual plungers are useful for low-volume stations, field kits, lab benches, and maintenance carts where a timed dispenser would be more equipment than the job requires. The operator loads the barrel, seats the piston, attaches the tip, and pushes the plunger to move material through the outlet. For clean results, the barrel should stay upright during filling, the piston should be seated squarely, and the tip should be matched to material thickness.

Techcon 410L-4 Specifications

Order this plunger for hand-applied 10 cc dispensing where the operator needs direct control of the feed rate. Browse related dispensers, mixers, and nozzles for matching barrels, pistons, caps, and tips. For current component information, visit Techcon.

Need Help?

Need help matching a manual plunger to barrel size, tip style, or material thickness? Call (800) 220-1966 or email [email protected].