Techcon 900-1150-3 Receiver Head, 60 cc with 3 ft Hose

Description

The Techcon 900-1150-3 receiver head connects a compatible time-pressure controller to a 60 cc syringe barrel through a secure head assembly and 3 ft of tubing. It provides the pressure-side connection needed to drive material from a syringe-based dispensing setup while keeping the barrel and air path organized at the work area.

Connection for controlled syringe dispensing

Receiver heads form the link between the controller and syringe assembly. The 60 cc size supports larger syringe-barrel jobs that need more material between changeovers, while the 3 ft hose keeps the controller relatively close to the station. This length can suit compact benches, fixtures, and cells where excess tubing would add clutter or delay pressure response.

Techcon 900-1150-3 receiver head details

Before pressurizing the system, confirm that the receiver head matches the syringe-barrel family and that the tubing is fully seated and free from cuts, kinks, or loose connections. Install the filled syringe according to the equipment instructions, secure the head, and begin with a conservative controller setting. Test the dispense away from the assembly and adjust pressure and time for the compound, tip size, temperature, and target deposit.

Keep the receiver head dedicated to compatible materials and clean air-side components according to the equipment instructions. A stable barrel holder can prevent movement while the tip approaches the part. Record controller settings after a successful setup so the next operator has a practical starting point for the same material and deposit.

Browse compatible syringe barrels, tips, controllers, and dispensing accessories for a complete system. See Techcon precision dispensing resources for the manufacturer’s wider 400 Series component range.

Need Help?

Need help matching this receiver head to a barrel, controller, or dispensing tip? Call (800) 220-1966 or email [email protected].