Techcon 400 Series Receiver Head for 60cc Syringe Barrels (900-1150-R)

Description

The Techcon 400 Series receiver head connects a dispenser or controller to a 60cc syringe barrel. In a dispensing valve setup, this head is the link that carries regulated air from the unit to the barrel so material feeds to the tip at a steady, controlled pressure for accident-proof dispensing.

Where a dispensing valve setup uses it

The receiver head belongs on any bench running 60cc barrels off a Techcon dispenser for adhesives, greases, and pastes. It gives a safe, sealed connection so the operator is not handling pressurized material directly. Because it seats the barrel and carries the air feed, a worn head can show up as pressure loss or leaks, and a fresh one restores clean, repeatable output.

How the receiver head holds up

The assembly uses a fitted Viton o-ring for a reliable seal, air tubing, and a male quick connector that mates to the dispenser outlet. This is a handling and feed component, not a fluid outlet, so it is not a mixing nozzle, a 2 part mixing nozzle, or a jb weld mixing nozzle. Inspect the o-ring and connector for wear, and keep the tubing clear so air pressure stays clean at the barrel. A spare head with a fresh o-ring keeps a barrel changeover quick when a seal finally gives out during a production run.

Ordering a dispensing valve setup

Match the receiver head to the 60cc barrel size and confirm the connector fits your dispenser before setup. For related barrels, tips, and fittings, browse dispensers, mixers, and nozzles. Current 400 Series receiver head information is available from Techcon.

Need Help?

Need help matching a receiver head to your barrel and dispenser? Call (800) 220-1966 or email [email protected].