Techcon 700 Series 10cc Blue End Caps, 1000 Pack

Description

Techcon 700 Series 10cc blue end caps are dispenser parts used to close the large flange end of filled syringe barrels during storage, staging, and transport inside a dispensing process. The cap snaps onto the barrel top with retaining clips, helping keep dust, skinning material, and shop debris away from the fluid before the barrel is connected to a receiver head or manual plunger.

dispenser parts Applications

These caps fit 10cc Techcon 700 Series syringe barrels used with adhesives, sealants, greases, solder materials, coatings, and other controlled fluids. They are useful when barrels are filled away from the dispensing cell, when a batch is staged for the next shift, or when the same material is issued to several benches. The 1000-pack quantity supports production lines that fill or replace many syringe barrels each week.

Use end caps with matching outlet tip caps when both ends of the barrel need to be protected. The cap is a storage and handling component, not a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle. It belongs with syringe barrels, pistons, receiver heads, and tip caps in the parts bin for time-pressure dispensing equipment.

dispenser parts Handling

After filling the barrel, wipe the flange area clean before snapping the cap into place. A clean seat helps the clips hold firmly and reduces the chance that cured residue will interfere with removal later. Remove the cap just before installing the piston drive hardware or receiver head, then inspect the barrel top for contamination before dispensing onto production parts.

dispenser parts Specs

For related syringe barrels, pistons, caps, receiver heads, and tips, browse Chemical Concepts dispensers, mixers, and nozzles. For manufacturer information, visit Techcon.

Need Help?

Need help matching caps to 10cc barrels and receiver heads in your dispensing setup? Call (800) 220-1966 or email [email protected].