Description
The Techcon nylon valved rod is an 8 inch dispensing rod with an integral valve, used in two-component manual dispensing work. Among Techcon two-component dispensing valve parts, this rod carries the load from the applicator handle to the material and uses its built in valve to control flow at the outlet, so each stroke advances a steady, repeatable amount of adhesive, sealant, or paste.
Where these dispensing valve parts fit
This rod belongs in shops that run Techcon two-component applicators for potting, bonding, and small batch mixing work on the assembly bench. The valved design lets the operator meter material and stop cleanly at the end of a bead rather than relying on a plain plunger. Because it is a wear item, keeping a spare on the shelf avoids downtime when a rod binds or the valve seat wears during a production run.
How the nylon rod holds up
The rod is molded from nylon, a tough thermoplastic that flexes without cracking and stands up to the oils and mild solvents common around adhesive work. Nylon gives a lower cost, general purpose option for materials that do not attack the polymer. Wipe the rod and valve clean at the end of each run, and check the valve seat for wear that would let material creep or drip between strokes.
Ordering these dispensing valve parts
Match the rod length and material to your applicator before you load material, and keep the valved rod with matching barrels, caps, and tips so a worn part never idles a station. For related sleeves, plungers, mixers, and tips, browse dispensers, mixers, and nozzles. Current two-component product information is available from Techcon.
| Attribute | Detail |
|---|---|
| Manufacturer | Techcon |
| Type | Valved rod, two-component dispensing |
| Length | 8 inch |
| Material | Nylon |
| Sold as | Each |
Need Help?
Need help matching a valved rod to your applicator? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.