Description
dispensing valve parts like this Techcon 4mm fitting and tubing kit connect a pressure pot to the fluid path that feeds a compatible valve, manifold, or dispense point. The kit is built around 4mm outside-diameter polyethylene tubing, a stainless fitting, and ferrules, giving maintenance and production teams a matched set of small components for pressure-fed adhesive, sealant, coating, or resin work.
dispensing valve parts for 4mm fluid lines
Use this kit when the reservoir setup calls for a compact 4mm feed line rather than a larger quarter-inch or three-eighths line. In TS1250-series fluid-feed setups, 4mm tubing fits smaller material paths where the valve connection or point-of-use layout calls for a narrow line. The clear tube helps operators see material movement during setup, while the black tube is useful when light-sensitive materials need better protection between the pot and the valve area.
The kit belongs with pressure pots, valve inlets, manifolds, and bench dispensing stations, not with cartridge static mixers. It is selected by tubing diameter, thread connection, material path, and the equipment already installed in the cell. Before a maintenance team releases the setup, confirm the pressure pot model, valve inlet, fitting thread, tubing route, and material compatibility against current Techcon guidance.
dispensing valve parts setup checks
Install the fitting into the reservoir or connected hardware with the correct thread seal method, then seat the tubing through the nut and ferrules without crushing the line. Keep bends gentle so the tube does not kink under pressure. After assembly, bring pressure up gradually, inspect the connection, and purge the line before placing adhesive or resin on production parts.
Specifications
| Spec | Detail |
|---|---|
| SKU | TECTS1252-4MM |
| Product type | Fitting and tubing accessory kit |
| Tube size | 4mm outside diameter |
| Tubing | Clear and black polyethylene tube |
| Fitting | Stainless 4mm OD tube x 1/4 NPT fitting |
| Included hardware | Nylon ferrules for compression connection |
Order this kit when a pressure-pot dispense station needs a fresh 4mm fluid line or a matching fitting package for service. For related valves, tubing, mixers, and dispense accessories, browse dispensers, mixers, and nozzles. For broader Techcon system context, visit Techcon.
Need Help?
Need help matching tubing diameter to your pressure pot and valve inlet? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.