Description
The Cox AirFlow 1 VBA 200B is a pneumatic dispensing gun for 200 mL two-component cartridges. It pulls from shop air to drive material through static mixers at controlled flow rates, with quick-change cartridge holders that handle four common mix ratios on the same tool. Steady output puts the gun behind structural adhesives, methacrylates, and slow-curing epoxies that wear out the hand on manual tools.
Where the Cox AirFlow 1 earns its place
Assembly stations running 200 mL cartridges of MMA, two-part epoxy, urethane, or silicone benefit from air-driven dispensing when bead size and consistency matter. The Series 1 air system regulates flow through a thumb dial so the same operator can lay a thick repair bead, then dial back for a thin perimeter pass. Cartridge changeovers between 1:1, 2:1, 4:1, and 10:1 ratios use interchangeable barrel sleeves, which keeps a single gun across multiple cartridge formats.
How the gun holds up
The body is anodized aluminum with a composite handle. The piston seal is replaceable in service, and the air regulator holds set pressure across an 8-hour shift. The 200 mL bulk format reduces cartridge waste compared to running 50 mL cartridges for the same job, and the kit ships with the cartridge holders preinstalled for fast first-use setup.
Cox AirFlow 1 specifications
| Spec | Value |
|---|---|
| Cartridge capacity | 200 mL |
| Mix ratios supported | 1:1, 2:1, 4:1, 10:1 |
| Drive | Pneumatic (Series 1 air) |
| Cox part | DP2C 200-MR-220-111 (159375) |
| UPC | 717647602206 |
Order the 200 mL MR kit when 200 mL is the right cartridge size and four ratio options on one tool replaces a rack of dedicated guns. Browse adjacent gun sizes in our dispensers, mixers, and nozzles category. The manufacturer reference is Cox.
Need Help?
Need help matching mix ratio and cartridge size for your application? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.